Factors Causing Unintended Sagittal and Axial Alignment Changes in High Tibial Osteotomy: Comparative 3-Dimensional Analysis of Simulation and Actual Surgery

Author:

Jung Se-Han12,Jung Min13ORCID,Chung Kwangho14ORCID,Kim Sungjun5,Park Jisoo12,Lee Ju-Hyung3,Lee So-Heun6,Choi Chong-Hyuk13,Kim Sung-Hwan12

Affiliation:

1. Arthroscopy and Joint Research Institute, Yonsei University College of Medicine, Seoul, Republic of Korea

2. Department of Orthopedic Surgery, Gangnam Severance Hospital, Yonsei University College of Medicine, Seoul, Republic of Korea

3. Department of Orthopedic Surgery, Severance Hospital, Yonsei University College of Medicine, Seoul, Republic of Korea

4. Department of Orthopedic Surgery, Yongin Severance Hospital, Yonsei University College of Medicine, Yongin, Republic of Korea

5. Department of Radiology, Gangnam Severance Hospital, Yonsei University College of Medicine, Seoul, Republic of Korea

6. Department of Medical Device Engineering and Management, Yonsei University College of Medicine, Seoul, Republic of Korea

Abstract

Background: Unintended secondary changes in the posterior tibial slope (PTS) and tibial torsion angle (TTA) may occur after medial open-wedge high tibial osteotomy (MOWHTO). In surgical procedures using patient-specific instruments (PSIs), it is essential to reproduce the PTS and TTA that were planned in simulations. Purpose: To analyze the factors causing unintended sagittal and axial alignment changes after MOWHTO. Study Design: Case series; Level of evidence, 4. Methods: Overall, 63 patients (70 knees) who underwent MOWHTO using a PSI between June 2020 and June 2023 were retrospectively reviewed. Preoperative and postoperative computed tomography scans were 3-dimensionally reconstructed. Simulated osteotomy was performed so that the weightbearing line could pass through the target point. A PSI gapper was 3-dimensionally printed to fit the posteromedial corner of the osteotomy gap in the simulated HTO model. After MOWHTO using the PSI gapper, the actual postoperative model was compared with the preoperative or simulation model. This assessment included PTS, TTA, hinge axis, and osteotomy-related parameters. Cortical breakage around the lateral hinge was evaluated to assess stability. Results: The mean PTS and TTA did not change in the simulation. However, significant changes were observed in the actual postoperative PTS and TTA (change, –2.4°± 2.2° and −3.9°± 4.7°, respectively). The PTS was reduced, while the TTA decreased with internal rotation of the distal fragment. The difference in the axial hinge axis angle (AHA) between the simulation and actual surgery was the factor most correlated with the difference in the PTS ( r = 0.625; P < .001). In regression analysis, the difference in the AHA was the only factor associated with the difference in the PTS (β = 0.558; P = .001), and there were no factors that showed any significant associations with the difference in the TTA. In subgroup analyses for the change in the TTA, the correction angle and anterior osteotomy angle were significantly higher in the more internal rotation group ( P = .023 and P = .010, respectively). The TTA change was significantly higher in the unstable group with lateral cortical breakage ( P = .018). The unstable group was more likely to show an internal rotation of ≥5° (odds ratio, 5.0; P = .007). Conclusion: The AHA was associated with a difference in the PTS between the simulation and actual surgery. The change in the TTA was caused by a combination of multiple factors, such as a large correction angle and anterior osteotomy angle, but mainly by instability of the lateral cortical hinge.

Publisher

SAGE Publications

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3