Development and validation of a quantitative wipe sampling method to determine platinum contamination from antineoplastic drugs on surfaces in workplaces at Swedish hospitals

Abstract

Introduction Antineoplastic drugs (ADs) are frequently used pharmaceuticals in the healthcare, and healthcare workers can be occupationally exposed to ADs. Monitoring of surface contamination is a common way to assess occupational exposure to ADs. The objective was to develop and validate a sensitive and quantitative monitoring method to determine surface contaminations of Pt as a marker for Pt-containing ADs. The surface contaminations of Pt-containing ADs were monitored at four Swedish hospital workplaces. Methods An analytical method was developed based on inductively coupled plasma mass spectrometry. The wipe sampling procedure was validated regarding different surface materials. The stability of collected wipe samples was investigated. Workplace surfaces were monitored by wipe sampling to determine contaminations of Pt-containing ADs. Results A wipe sampling and analytical method with a limit of detection of 0.1 pg Pt/cm2 was developed. Pt was detected in 67% of the wipe samples collected from four workplaces, and the concentrations ranged from <0.10 to 21100 pg/cm2. In 4% of samples, the detected surface contaminations of Pt in three hospital wards were above proposed hygienic guidance value (HGV) of Pt. In the hospital pharmacy, 9% of the detected surface contaminations of Pt were above lowest proposed HGV. Conclusions A user-friendly, specific, and sensitive method for determination of surface contaminations of Pt from ADs in work environments was developed and validated. A large variation of contaminations was observed between detected surface contaminations of Pt in samples collected in wards, and it likely reflects differences in amounts handled and work practices between the wards.