Establishment and verification of theoretical model for forming design of balanced curved rubber hose

Abstract

This article focuses on the establishment of theoretical model for the formation of balanced curved rubber hose under pressure. According to the rotation angle of the cord along the axial direction in the curved rubber hose is the same as that in the straight hose before forming, the theoretical model of the straight hose length was established. Then based on the thin shell theory without considering bending moments and shear force, and considering the deformation characteristics of the rope structure and the mechanical equilibrium angle of the hose, the theoretical model of the balance performance was established. According to the theoretical model, the influence of structural parameters of curved hose on the length of the straight hose and the balance performance of hose was studied. Eventually, the finite element model was established to simulate the deformation process of the curved hose. Based on the calculation results of the theoretical and simulation model, the experiment of forming and balance performance of the curved hose was carried out. The experimental results are in good agreement with the theoretical and simulation model.