Nonlinear modeling of the failure of a graphite epoxy under a three-point bending test

Abstract

The application of modeling theories and the choice of failure criteria are difficult in part because they are too varied and must be validated by biaxial tests, which are expensive to be performed. This article is devoted to the nonlinear modeling and failure criteria which are employed in the design and analysis of anisotropic materials. Indeed, in this work, a study of the macroscopic and microscopic behavior of a graphite epoxy under a three-point bending test is conducted, and the successive failures are also predicted. Experimentally, the damage progression and the effect of geometrical parameters are followed and identified in detail. The analytical modeling is based on a recently developed approximation for isotropic materials. This approximation is also valid for the studied quasi-isotropic laminated composite. A software program has been elaborated for the application of the most general failure criteria. The results obtained by this analytical modeling show a good correlation with those of the experimental study.