Comparative Evaluation of Dimensional Accuracy, Surface Characteristics, and Load Deflection Attributes of 0.019" × 0.025" Stainless Steel Wires Sourced from Six Different Commercial Houses: An In Vitro Study

Abstract

Aims & Objectives: The aim of the study was to evaluate and compare dimensional accuracy, surface characteristics and load deflection attributes of SS wires sourced from six different commercial houses. Materials & Methods: 0.019” x 0.025” SS wire samples were divided into 6 groups and evaluated and compared for the aforementioned properties. Dimensional accuracy, surface roughness, frictional resistance, load deflection rate and ultimate tensile strength were evaluated and compared. Results: Dimensional accuracy did not vary significantly. Surface Profilometry proved 3M Unitek (Group 1) to be the wire with least irregularities. According to SEM, Modern Orthodontics (Group 6) and 3M Unitek (Group 1) in terms of ‘Sa’ and ‘Sq’ respectively had the smoothest surface finish. SS wires sourced from G&H Orthodontics (Group 2) exhibited least frictional resistance. Load deflection rates varied for all the groups for all three parameters under the study. UTS was best for SS wires sourced from Rabbit Force Orthodontics (Group 5). Conclusion: No wire from a single commercial house excels in all the parameters that were evaluated, each one having its aces and minuses.