The rate effect on fracture mechanics of dam concrete based on DIC and AE techniques

Abstract

In order to study the effect of loading rate on fracture behavior of dam concrete, wedge splitting tests of various loading rates (0.1, 0.01, and 0.001 mm/s) are carried out on two kinds of full-graded dam concrete notched cubes with side lengths of 300 and 450 mm, respectively. Digital image correlation and acoustic emission technique are used to measure the deformation and acoustic emission parameters of the dam concrete. Test results show that: the peak load and fracture energy of dam concrete specimens increases with the increase of loading rate. And the higher the loading rate is, the fracture of concrete shows more obvious brittleness. Influenced by the boundary effect, the CTOD increases with the increasing of loading rate, however, the length of crack decreases as loading rate increases. With the loading rate increases, the energy mutation area is more obvious, while the accumulated acoustic emission energy is affected by both the loading rate and the maximum aggregate size. The number of acoustic emission three-dimensional locating points and the shear signal decrease with the increase of loading rate, which is attributed to that the faster the loading rate is, the less sufficient the development of micro cracks in concrete is. The test results can supply experimental data to the fracture mechanics of dam concrete.