Affiliation:
1. Division of Sustainable Development, College of Science and Engineering Hamad Bin Khalifa University, Doha, Qatar
Abstract
This study analyzes the feasibility of satisfying the demand of three Football Stadiums for the 2022 FIFA World Cup in Qatar, using the wind’s kinetic energy. For all three selected locations (Lusail, Al Rayyan, and Al Wakrah), the wind potentiality is calculated through an environmental parameters study, from which the wind power density is obtained. Furthermore, a commercial wind turbine with proper characteristics is selected, and the same case study for each location is presented, to quantify the capacity that wind energy offers for satisfying the maximum energy demand of each associated stadium. In addition, the environmental benefits and the time required by each wind farm to satisfy the energy demand are computed. The results reveal that the conditions enable the use of wind energy for this purpose, based on a 5.06 m/s, 4.63 m/s, and 5.18 m/s velocity mean for Lusail, Al Rayyan, and Al Wakrah, respectively; from which values of 187.49 W/m2, 150.96 W/m2, and 187.29 W/m2 of wind power density are obtained. Also, the proposed wind farms could produce 69,952.56 MWh/year, 59,550.19 MWh/year, and 75,333.70 MWh/year, respectively. Moreover, the wind farms should produce energy for a period of 5.64 h, 4.41 h, and 5.23 h, to satisfy the maximum demand by a football match in its associated location. Additionally, to avoid the implementation of a storage system, the electricity obtained from the wind is connected to the power grid, decreasing the quota of fossil fuel power plants. In consequence, Qatar will eliminate the emissions of approximately 23.376 tons of CO2 in total per trio of matches held in these stadiums. Finally, a post 2022 FIFA World Cup scenario is analyzed, obtaining a positive outcome from both environmental and economic perspectives, in which an average of 14,675 tons of CO2 and 6.03 Million US$ can be saved annually.
Subject
Energy Engineering and Power Technology,Fuel Technology,Nuclear Energy and Engineering,Renewable Energy, Sustainability and the Environment