Failure Characteristics of Coal Seam Floor and Risk Assessment of Water Inrush Caused by Underground Coal Mining

Abstract

Failure characteristics of the coal seam floor above-confined aquifer are key to evaluating the water inrush risk from the floor in the deep mining. At present, based on the analysis of water inrush impact indicators, mathematical evaluation methods are often used to evaluate the water inrush risk of a mining floor. This study proposes a theoretical risk assessment method for water inrush from the floor considering the failure characteristics of the coal seam floor above-confined aquifer. The 11301# coalface in the Wanglou colliery, Shandong Province, is considered as a case study. The mechanical model of the mining floor stress along the coalface inclination direction was established, and the analytical solutions of the vertical, horizontal, and shear stress and floor failure depth were derived. The floor failure mode along the coalface inclination direction is similar to the letter “lying flat-B” and the maximum and minimum failure depth is around 13 and 6 m. Furthermore, the dynamic failure characteristics of the floor during coal mining were simulated. Subsequently, the thickness of the floor key aquiclude was determined and the water inrush coefficient exhibits a certain trend from increasing to becoming stable in the mining process, that is, from 0.05 to 0.08 MPa/m. The analytical solution of the critical water pressure for floor aquiclude failure was derived based on the limit equilibrium theory. That is, the ultimate water pressure 3.9 MPa is greater than the actual water pressure 2 MPa, and there is no floor water inrush risk. Taking these into account, the water inrush risk of the mining floor above-confined aquifer was comprehensively analyzed and evaluated. The findings were deemed to be consistent with the actual mining case.