Abstract
This paper goal was to increase the quality of the drying ware and to lower the drying scarp rate in one local brick factory. The registration of drying air parameters (temperature, humidity and velocity) along the dryer channels as well as the drying ware linear shrinkage and mass change were monitored for a month. Material and Energy balances were also recorded. Results have revealed that the drying air humidity and temperature profiles were not evenly distributed along the height of the drying tunnels. The ambient air breakthrough into the dryer was experimentally identified and quantified. It was the cause of the product quality deterioration and the reason why the critical and residual moisture in some of the products was larger than the desired one. Based on monitored data and mass and energy balances a solution was proposed for preventing the “false” air breakthrough, upgrade of the existing dryer fans and installation of the novel, measuring equipment. A hypothetical solution for increasing the capacity of the dryer, which uses the registered material and energy balances as well as factory management expectation, that the production of 50.000 masonry units per day will be achieved soon, was given also.
Publisher
Asociatia Profesionala in Tehnologii Moderne de Fabricatie
Subject
Industrial and Manufacturing Engineering
Reference10 articles.
1. "1. Communication from the commission to the European parliament and the council, (2012). Strategy for the sustainable competitiveness of the construction sector and its enterprises, Brussel, 31.7.2012, COM (2012) 433 final.
2. 2. Communication from the commission to the European parliament and the council the European economic and social committee and the committee and the committee of the regions (2012). A resource-efficient Europe - Flagship initiative under the Europe 2020 Strategy, Brussel, 26.1.2011, COM (2012) 21 final.
3. 3. Shokouhmand H, Abdollahi V, Hosseini S, Vahidkahah K, (2011). Performance optimization of a brick dryer using porous simulation approach, Drying Technology 29 3 pp 360-370.
4. 4. Dolanc. G, Vladimir. J, (1997). Improvement of the drying process control in a clay product plant, IAF Proceeding 30 6 pp. 1575-1580.
5. 5. Velthuis M.F.J, Denissen M.A.J, (1997). Simulation model for industrial dryers: reduction of drying times of ceramics &saving energy, Drying Technology 15 6-8 pp 1941-1948.