Author:
Sezek Sinan, ,Kizilelma Muhammed Ruhi,Aksakal Bünyamin, ,
Abstract
"The stent is manufactured by traditional machining methods. This study has been carried out to improve the mechanical properties of stents produced by removing swarf. Production methods have been examined and extruded to produce a seamless cylindrical section pipe. The Mg-Zn-XX alloy used in stent production was used in this study. Extrusion mold design is made to produce stent with Mg-Zn-XX alloy. These parameters are optimized because temperature and friction values from the Extrusion parameters affect the shaping parameters of the generated stent. During optimization, the Simufact finite elements program was used. The optimization has shown that the Mg-Zn-XX alloy has the best styling results of friction of 300 o C de Coulumb 0.4. "
Publisher
Asociatia Profesionala in Tehnologii Moderne de Fabricatie
Subject
Industrial and Manufacturing Engineering
Reference14 articles.
1. "1. E. Wilkins, L. Wilson, K. Wickramasinghe, P. Bhatnagar, J. Leal, R. Luengo-Fernandez, et al. (2017), European cardiovascular disease statistics, Eur Heart Netw (2017)
2. 2. Gökgöz, O. T., (2019), Stent İmalatina Yönelik Lazer Torna Tezgahı Tasarımı Ve Üretimi, 1-61, Ankara.
3. 3. G. Rebagay, S. Bangalore (2019), Biodegradable polymers and stents: the next generation? Curr Cardiovasc Risk Rep, 13, pp. 22, doi: 10.1007/s12170-019-0617-x
4. 4. F. Berti, A. Spagnoli, L. Petrini (2019), A numerical investigation on multiaxial fatigue assessment of Nitinol peripheral endovascular devices with emphasis on load non-proportionality effects Eng Fract Mech, Article 106512,10.1016/J.ENGFRACMECH.2019.106512
5. 5. D. Stoeckel, C. Bonsignore, S. Duda, M. Dunitz (2022), A survey of stent designs Minim Invasive Ther Allied Technol, 11, 137-147, doi: 10.1080/136457002760273340