SHEAR STRUCTURAL RESPONSE OF A PROTOTYPE STRENGTHENING SYSTEM DESIGNED FOR STONE MASONRY PANELS
-
Published:2022-12-20
Issue:3
Volume:14
Page:245-250
-
ISSN:2067-3604
-
Container-title:International Journal of Modern Manufacturing Technologies
-
language:
-
Short-container-title:IJMMT
Author:
Spiridon Ionut, ,Isopescu Dorina Nicolina,Ungureanu Dragos,Taranu Nicolae,Alupoae Sergiu,Sbirlea Catalin, , , , ,
Abstract
This paper presents the set-up needed for an experimental study regarding the in-plane shear behaviour of stone masonry panels, strengthened with a prototype hemp reinforced mortar. Seven stone masonry panels will be designed and manufactured for this purpose: one unreinforced, three plastered on both sides and three plastered on a single side. The aim of this experimental study is to evaluate the effectiveness of the prototype hemp reinforced mortar in enhancing the shear strength and the displacement capacity of the stone masonry walls. In addition, the design and the manufacturing stages of the prototype hemp reinforced mortar have been carefully described, thus allowing an easy application of this TRM system on a large scale. Crucial aspects regarding the shear behaviour of stone masonry unstrengthen/strengthened walls, such as the quantification of the ultimate forces and displacements, the description of the dominant failure modes, and the characterization of the stress-strain state may be analysed by performing the envisaged experimental study based on the proposed set up.
Publisher
Asociatia Profesionala in Tehnologii Moderne de Fabricatie
Subject
Industrial and Manufacturing Engineering
Reference25 articles.
1. "1. Ghiga, D.A., Taranu, N., Ungureanu, D., Isopescu D,N., Oprisan, G., Hudisteanu, I., (2020). A detailed micro-modelling approach for the diagonal compression test of strengthened stone masonry walls, IOP Conference Series-Materials Science and Engineering, 916, 012041. 2. 2. Meriggi, P., Caggegi, C., Gabor, A., de Felice, G., (2022). Shear-compression tests on stone masonry walls strengthened with basalt textile reinforced mortar (TRM), Construction and Building Materials, 316, 125804. 3. 3. Cassese, P., Balestrieri, C., Fenu, L., Asprone, D., Parisi, F., (2021). In-plane shear behaviour of adobe masonry wallets strengthened with textile reinforced mortar, Construction and Building Materials, 306, 124832. 4. 4. Ghiga, D.A., Taranu, N., Ungureanu, D., Isopescu, D.N., Scutaru, M.C., Hudisteanu, I., (2019). Numerical modelling of structural behaviour of URM panels strengthened with cement matrix composites, IOP Conference Series-Materials Science and Engineering, 591, 012037. 5. 5. Ferrara, G., Caggegi, C., Martinelli, E., Gabor, A., (2020). Shear capacity of masonry walls externally strengthened using Flax-TRM composite systems: experimental tests and comparative assessment, Construction and Building Materials, 261, 120490.
|
|