Irradiation and Temperature effects on Modified SEPIC Converter Performance for PV Systems-Reference-Cited by-同舟云学术

Irradiation and Temperature effects on Modified SEPIC Converter Performance for PV Systems

Published:2023-10-04 Issue: Volume:18 Page:152-157
ISSN:2224-350X
Container-title:WSEAS TRANSACTIONS ON POWER SYSTEMS
language:en
Short-container-title:

Author:

Daud Abdel-Karim¹,Khader Sameer¹

Affiliation:

1. Department of Electrical Engineering Palestine Polytechnic University (PPU) P.O. Box 198, Hebron PALESTINE

Abstract

The changing position and nature of the sun due to changes in ambient temperature and irradiance level throughout the day is the main difficulty with photovoltaic (PV) systems. This leads to fluctuations in power levels. Therefore, maximum power point tracking (MPPT) under these conditions is the main challenge. This paper proposes a new approach for directly operating at the maximum power point (MPP) at any value of solar irradiation and cell temperature without applying further mathematical processing to operate at that point. This technique is applied to a PV system containing a high-static-gain modified single-ended primary coil MSEPIC converter, which is characterized by high efficiency and high gain voltage. The performance of this converter is obtained with respect to load and output voltage variation under different climatic conditions in Hebron, Palestine. Solar panel type LG450N2W-E6 is selected as the PV generator in this system with 450 W at 41.1 V at MPP. The proposed model is analyzed and simulated in Matlab/Simulink, and m-file code.

Publisher

World Scientific and Engineering Academy and Society (WSEAS)

Subject

Electrical and Electronic Engineering,Energy (miscellaneous)

Reference15 articles.

1. Martin, S. S., Chebak, A., Barka, N., Development of renewable energy laboratory based on integration of wind, solar and biodiesel energies through a virtual and physical environment, 2015, 3rd International Renewable and Sustainable Energy Conference, Marrakech, 2015, pp. 1-8. https://doi.org/10.1109/irsec.2015.7455086.

2. Mahmoud, Y., Xiao, W., Zeineldin, H. H., A simple approach to modeling and simulation of photovoltaic modules, IEEE Trans. Sustain. Energy, vol. 3, no. 1, Jan. 2012, pp. 185–186. https://doi.org/10.1109/tste.2011.2170776.

3. Mastromauro, R. A., Liserre, M., Dell’Aquila, A., Control issues in single-stage photovoltaic systems: MPPT, current and voltage control, IEEE Trans. Ind. Informat., vol. 8, no. 2, May. 2012, pp. 241– 254. https://doi.org/10.1109/tii.2012.2186973.

4. Khader, S., Daud, A.K., Boost chopper behaviors in Solar photovoltaic system, Smart Grid and Renewable Energy , Vol.12, No.3, March 2021, https://doi.org/10.4236/sgre.2021.123003.

5. Boonraksa P., Chaisa-Ard T., et.al ,” Design and Simulation of Fuzzy logic controller based MPPT of PV module using MATLAB/ Simulink”, IEEE Xplore: 9 March 2022, https://doi/ 10.1109/iEECON53204.2022.9741 641.