Numerical Modelling of Cylindrical Fluid Filled Tank-Reference-Cited by-同舟云学术

Numerical Modelling of Cylindrical Fluid Filled Tank

Published:2024-09-03 Issue: Volume:19 Page:257-269
ISSN:2224-347X
Container-title:WSEAS TRANSACTIONS ON FLUID MECHANICS
language:en
Short-container-title:

Author:

Kotrasová Kamila¹,Frantík Petr²,Kormaníková Eva¹

Affiliation:

1. Institute of Structural Engineering and Transportation Structures, Faculty, Faculty of Civil Engineering, Technical University of Košice, Vysokoškolská 4, 042 00 Košice, SLOVAKIA

2. Institute of Structural Mechanics, Faculty of Civil Engineering, Brno University of Technology, Veveří 331/95, 602 00 Brno, CZECH REPUBLIC

Abstract

The demand for drinking and service water storage is rising with changing climate conditions and increasing life expectancy. The tanks are commonly used to store large volumes of liquids and materials in various fields of the economy. This paper presents the model of the numerical simulation for the steel tank filled with fluid, using the finite element method. The results of the tank filled with water are presented, by the results: the pressure of the fluid the effective stress, and the maximum deformation of the tank solid domain. The correctness of the pressure values was verified by the simple calculation of the fluid pressure. Finally, the paper documents the results for various fluid fillings with a considered range of fluid densities. The influence of the fluid filling height on the behavior of the solid domain of the fluid filling container loaded by the static loading as well as the effect of the width of the tank on the behavior of the solid domain of the fluid filling container.

Publisher

World Scientific and Engineering Academy and Society (WSEAS)

Reference36 articles.

1. Močilan M., Žmindák, M., Pastorek P. Dynamic analysis of fuel tank. In: Procedia Engineering. 2016, (136): 45-49. https://doi.org/10.1016/j.proeng.2016.01.172.

2. Rai D. C. Seismic retrofitting of R/C shaft Support of elevated tanks. In: Earthquake Spectra. 2002, (18):745-760. https://doi.org/10.1193/1.1516753.

3. Jendzelovsky N., Balaz L. Numerical Modeling of Cylindrical Tank and Compare with Experiment. In: Applied Mechanics and Materials 2014, 617;148-151. https://doi.org/10.4028/www.scientific.net/A MM.617.148.

4. Annamalai S, Periyakgounder S, SAlaraj A.|B, Paramasiam K. Deformation and stress analysis of a fuel tank under static loading condition. In: Materialstoday: Proceedings. 2021, 39/1;378-387. https://doi.org/10.1016/j.matpr.2020.07.604.

5. Lee, J. H., Cho, J. R. Simplified earthquake response analysis of rectangular liquid stora tanks considering fluid-structure interactions. Engineering Structures. 2024, 300, 117157. https://doi.org/10.1016/j.engstruct.2023.11715 7ge.