Relationships among compressional wave attenuation, porosity, clay content, and permeability in sandstones

Abstract

Anelastic attenuation is the process by which rocks convert compressional waves into heat and thereby modify the amplitude and phase of the waves. Understanding the causes of compressional wave attenuation is important in the acquisition, processing, and interpretation of high‐resolution seismic data, and in deducing the physical properties of rocks from seismic data. We have measured the attenuation coefficients of compressional waves in 42 sandstones at a confining pressure of 40 MPa (equivalent to a depth of burial of about 1.5 km) in a frequency range from 0.5 to 1.5 MHz. The compressional wave measurements were made using a pulse‐echo method in which the sample (5 cm diameter, 1.8 cm to 3.5 cm long) was sandwiched between perspex (lucite) buffer rods inside the high‐pressure rig. The attenuation of the sample was estimated from the logarithmic spectral ratio of the signals (corrected for beam spreading) reflected from the top and base of the sample. The results show that for these samples, compressional wave attenuation (α, dB/cm) at 1 MHz and 40 MPa is related to clay content (C, percent) and porosity (ϕ, percent) by α=0.0315ϕ+0.241C−0.132 with a correlation coefficient of 0.88. The relationship between attenuation and permeability is less well defined: Those samples with permeabilities less than 50 md have high attenuation coefficients (generally greater than 1 dB/cm) while those with permeabilities greater than 50 md have low attenuation coefficients (generally less than 1 dB/cm) at 1 MHz at 40 MPa. These experimental data can be accounted for by modifications of the Biot theory and by consideration of the Sewell/Urick theory of compressional wave attenuation in porous, fluid‐saturated media.