Anisotropic three-term amplitude-variation-with-offset projections: A case study

Abstract

A seismic amplitude-variation-with-offset (AVO) analysis is an important element in seismic reservoir characterization and has been successfully applied in many fields. Traditionally, AVO studies are based on AVO intercept ([Formula: see text]) and gradient ([Formula: see text]) only; curvature ([Formula: see text]) is neglected because it is very sensitive to noise and avoiding noisy [Formula: see text] is very difficult in practice. The recently introduced concept of three-term (3T) AVO projections, combined with continuous improvements in seismic data acquisition and processing, allows interpreters to effectively use [Formula: see text] by optimizing projection angles based not only on rock physics but also on seismic noise. The effectiveness of the 3T AVO projection, in which [Formula: see text], [Formula: see text], and [Formula: see text] are used as the triplet of reflectivities that are summed in the projection, and the impact of random noise on the 3T AVO projection have been investigated using data from an offshore Western Australian field. The 3T AVO projection is used in the framework of the extended elastic impedance. Because the study area is known to have nonnegligible differences in anisotropy parameters between the various lithologies, its impact on [Formula: see text] and [Formula: see text] is taken into account. First, the 3T projection angle targeting lithology fraction logs is optimized using well-log data. Analyses using synthetic seismograms are then performed to investigate the impact of seismic noise. Finally, the method is applied to field data. The results find that (1) [Formula: see text] is an important component of seismic reservoir characterization even if it appears unusable and (2) seismic noise must be taken into account when optimizing the projection angle.