1. Smith, T. M., Unsteady Simulations of Turbulent Premixed Reacting Flows, Ph.D. thesis,Georgia Institute of Technology, Atlanta, GA, March 1998. Kerstein, A. R. "Linear-Eddy Modeling of Turbulent Transport. Part 4. Structure of Diffusion-Flames," Combustion Science and Technology, Vol. 81, 1992, pp. 75-86. Kerstein, A. R. "Linear-Eddy Modeling of Turbulent Transport. Part V: Geometry of Scalar Interfaces," Physics of Fluids A, Vol. 3, No. 5, 1991, pp. 1110-1114. Baum, M., Poinsot, T., and Thevenin, D."ACCUrate boundary conditions for multicomponent reactive flows," Journal of Computational Physics, Vol. 116, 1994, pp. 247-261. Poinsot, T. and Lele, S., LLBoundary Conditions for Direct Simulations of Compressible Viscous Flow," Journal of Computational Physics, Vol. 101, 1992, pp. 104-129. Katta, V. and Roquemore, W. "Simulation of Unsteady Flows in a Axisymmetric Research Combustor Using Detailed-Chemical Kinetics," AIAA 98-3766, 1998. Sturgess, G. and Hsu, K.Y. "Entrainment of mainstream flow in a trapped-vortex combustor," AIAA97-0261, 1997. Kim, W.W. and Menon, S. "Numerical modeling for fuel/air mixing in a dry low-emission premixer," Second AFOSR International Conference on DNS and LES, 1999. Kerstein, A. R. "Linear-Eddy Model of turbulent Scalar Transport and Mixing," Combustion Science and Technology, Vol. 60, 1988, pp. 391-421. Calhoon, W. H. and Menon, S. "Linear-Eddy Subgrid Model for Reacting Large-Eddy Simulations: Heat ReleaseEffects," AIAA-974368, 1997. Menon, S., McMurtry, P., and Kerstein, A. R. "A Linear Eddy Mixing Model for Large Eddy Simulation of Turbulent Combustion," LES of Complex Engineering and Geophysical Flows, edited by B. Galperin and S. Orszag, Cambridge University Press, 1993. Smith, T. M. and Menon, S. "Subgrid Combustion Modeling for Premixed Turbulent Reacting Flows," AIAA-984.242, 1998. Chakravarthy, V. K. and Menon, S. "Large eddy simulations of stationary premixed flames using a subgrid flamelet approach," Second AFOSR International Conference on DNS and LES, 1999.
2. \ 1 b) z = 55mm 2000.0 I-""