Affiliation:
1. Escola de Engenharia de São Carlos
2. Universidade Presbiteriana Mackenzie
3. Portland State University
4. Jiangsu University
Abstract
Abstract
Of the various thermal processing methods for steel, heat treating has the greatest overall impact on control of residual stress and on dimensional control. This article provides an overview of the effects of material- and process-related parameters on the various types of failures observed during and after heat treating of quenched and tempered steels. It describes phase transformations of steels during heating, cooling of steel with and without metallurgical transformation, and the formation of high-temperature transformation products on the surface of a carburized part. The article illustrates the use of carbon restoration on decarburized spring steels. Different geometric models for carbide formation are shown schematically. The article also describes the different microstructural features such as grain size, microcracks, microsegregation, and banding.
Reference142 articles.
1. Quench Distortion of Steel Parts;Owaku;Netsu Shori, J. Jpn. Soc. Heat Treat.,1992
2. Structure and Stability of Fe3C-Cementite Surfaces from First Principles;Chiou;Surface Science,2003
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
1. Problems Associated with Heat Treated Parts;Practical Heat Treating: Processes and Practices;2024-04-30
2. Grinding optimization using nondestructive testing (NDT) and empirical models;Machining Science and Technology;2024-01-02
3. Problems Associated with Heat Treated Parts;Analysis and Prevention of Component and Equipment Failures;2021-08-30