Affiliation:
1. MIREA — Russian Technological University (M.V. Lomonosov Institute of Fine Chemical Technology)
2. State Research Institute of Chemistry and Technology of Organoelement Compounds
Abstract
Objectives. To study the possibility of using nitrogen-containing organosilicon compounds in the creation of heat-resistant and fireresistant casting compositions to seal high-voltage high-frequency equipment.Methods. Nitrogen-containing organosilicon compounds were obtained using the N-siloxycarbonylation, formylation, and silylation methods. The methods used in the work were infrared spectroscopy, elemental analysis, viscometry, and differential scanning calorimetry. The mechanical and dielectric properties of the samples were determined.Results. Previously unknown substances and compounds containing nitrogen-containing organosilicon products as components of the curing composition were obtained. Their physicomechanical and operational properties were examined, including the possibility of using them as filling heat-resistant and fire-resistant compositions for sealing high-voltage and high-frequency equipment.Conclusions. It was shown that nitrogen-containing organosilicon compounds — 3-(diethylamino)-2-[(triethoxysilyl)oxy]propyl-2-methacrylate and triethoxysilyl ester of γ-triethoxysilylpropyl-carbamic acid — can be used as part of a curing system together with bromine-containing fillers, in order to obtain compounds used for filling high-voltage high-frequency transformers, throttle valves, and other electronic equipment elements with non-combustible properties and increased heat resistance.
Reference22 articles.
1. Andrianov K.A., Khananashvili L.M. Tekhnologiya elementoorganicheskikh monomerov i polimerov (Technology of Organoelement Monomers and Polymers). Moscow: Khimiya; 1973. 400 p. (in Russ.).
2. Sobolevskii M.V., Muzovskaya O.A., Popeleva G.S. Svoistva i oblasti primeneniya kremniiorganicheskikh produktov (Properties and Applications of Organosilicon Products). Moscow: Khimiya; 1975. 296 p. (in Russ.).
3. Gerasimov D.M., Iluhina M.A., Glazov P.A. Low-molecular organosilicone rubbers in sealant compositions. Trudy VIAM = Proceedings of VIAM. 2020;90(8):35–45 (in Russ.). https://doi.org/10.18577/2307-6046-2020-0-8-35-45
4. Smyslova R.A., Kotlyarova S.V. Spravochnoe posobie po germetiziruyushchim materialam na osnove kauchukov (A Guide to Rubber Based Sealing Materials). Moscow: Khimiya; 1976. 72 p. (in Russ.).
5. Severnyi V.V., Minasyan R.M., Makarenko I.A., Biryuzova N.M. The mechanism of “cold-curing” low molecular weight polyorganosiloxane rubbers. Polym. Sci. U.S.S.R. 1976;18(6):1464–1471. https://doi.org/10.1016/0032-3950(76)90342-7 [Original Russian Text: Severnyi V.V., Minasyan R.M., Makarenko I.A., Biryuzova N.M. The mechanism of “cold-curing” low molecular weight polyorganosiloxane rubbers. Vysokomolekulyarnye soedineniya. Ser. A. 1976;18(6):1276–1281 (in Russ.).]