Affiliation:
1. Federal Scientific Agroengineering Center VIM, Moscow, Russian Federation
Abstract
The fundamental properties of metal powders with small particles change, which opens up a wide range of applications of such materials. Currently, nanopowders are used in many industries to improve the quality of the resulting products. (Research purpose) The research purpose is in isolating a fine fraction of metal powders obtained by electroerosive dispersion for further experiments with this material, and also proving the possibility of obtaining such fractions by this method. (Materials and methods) A fine fraction of metal powders obtained by the method of electroerosive dispersion was isolated, which proved its effectiveness in obtaining conductive powder materials with the desired final physical and mechanical properties. This method results in a fairly large spread across fractions. Authors received material for research on experimental installations of the "Nano-Center" Center for Collective Use. The article presents the methods of experimental research of fractional composition on the example of metal powders of hard alloy grades T15K6 and VK8, copper powder M1, brass powder LTs38MTsS2 and bronze powder BrAZh9-12 obtained by electroerosive dispersion. (Results and discussion) The metal powder was divided into three fractions, depending on the particle size: more than 0.071 mm, from 0.02 to 0.071 mm and less than 0.02 mm. The presence of fine particles of less than 1.5 microns in the total mass of the studied powders was proved using a membrane method with a ceramic filter. Sedimentation showed specific sizes of minimal particles (from 86.4 to 116 nm). (Conclusions) Based on the results of experiments, it is possible to obtain metal powders of a fine fraction using the method of electroerosive dispersion.
Publisher
FSBI All Russian Research Institute for Mechanization in Agriculture (VIM)
Reference10 articles.
1. Kreymer A.V., Ivanov P.S. Fizicheskiye metody polucheniya nanoporoshkov [Physical methods for the production of nanopowders]. Sovremennyye issledovaniya. 2018. N5(09). 218-222 (In Russian).
2. Alymov M.I., Rubtsov N.M., Seplyarskiy B.S., Zelenskiy V.A., Ankudinov A.B. Polucheniye i issledovaniye nanochastits zheleza, zashchishchennykh oksidnoy plenkoy [Production and studying of iron nanoparticles protected by an oxide fi lm]. Neorganicheskiye materialy. 2017. Vol. 53. N9. 929-933 (In Russian).
3. Romanov I.V., Zadorozhniy R.N. Metody polucheniya metallicheskikh poroshkov dlya tekhnologiy vosstanovleniya i uprochneniya detaley sel’skokhozyaystvennoy tekhniki [Methods of obtaining metal powders for technologies of restoration and strengthening of agricultural machinery parts]. Sel’skokhozyaystvennaya tekhnika: obsluzhivaniye i remont. 2019. N11. 37-44 (In Russian).
4. Shestopalova L.P. Sposob opredeleniya stepeni dispersnosti nanoporoshka [Method for determining the dispersion level of nanopowder]. Naukoyemkiye tekhnologii v mashinostroyenii. 2018. N7(85). 45-48 (In Russian).
5. Zadorozhniy R.N., Romanov I.V., Shemberev I.A. Issledovaniye svoystv metallicheskikh poroshkov, poluchennykh iz otkhodov tverdykh splavov elektroerozionnym dispergirovaniyem [Studying of properties of metal powders obtained from solid alloy waste by electroerosive dispersion]. Trudy GOSNITI. 2018. Vol. 130. 208-213 (In Russian).
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献