Author:
Vieira Thiago M.,Santana Ézio C.,Souza Luiz F. S.,Silva Renan O.,Ferreira Tarso V.,Riffel Douglas B.
Abstract
<abstract>
<p>The occurrence of defects in solar cells is intrinsically related to a reduction in the efficiency and reliability of these devices. Therefore, monitoring techniques, such as lock-in thermography, electroluminescence and the I-V characteristic curve are adopted in order to evaluate the integrity of the solar cells. In the present work, a novel experimental procedure for the lock-in thermography of solar cells is proposed, aiming to improve the detection capability of the assay. Conventional techniques use pulse width modulation to operate the cell at a fixed point on the I-V curve. Instead, we propose a methodology based on a sinusoidal electric current excitation in order to extend the range of operational points that are close to the maximum power point as the cell operates in the field. Some traditional image processing techniques (principal component analysis, the fast Fourier transform and the four-step phase-shifting method) have been used to analyze the thermal images captured by an infrared camera during steady-state operation mode of the solar cells using both sinusoidal electric current signal and standard pulse width modulation procedures. Comparison between the results of both procedures found that this novel approach provides smoother and clearer delimitation of the defects. Furthermore, the contrast of the phase images was found to exhibit significant changes between the defective and non-defective regions for different modulation frequencies and types of defects. From the achieved results, it was possible to obtain a satisfactory characterization of the existing defects.</p>
</abstract>
Publisher
American Institute of Mathematical Sciences (AIMS)
Subject
Energy Engineering and Power Technology,Fuel Technology,Renewable Energy, Sustainability and the Environment
Reference30 articles.
1. Pinho J, Galdino M (2014) Engineering manual for photovoltaic systems. CEPEL—CRESESB. Available from: http://www.cresesb.cepel.br/publicacoes/download/Manual_de_Engenharia_FV_2014.pdf.
2. Olarte J, Dauvergne JL, Herrán A, et al. (2019) Validation of thermal imaging as a tool for failure mode detection development. AIMS Energy 7: 646–659. https://doi.org/10.3934/energy.2019.5.646
3. Breintenstein O, Langenkamp M (2010) Lock-in Thermography—Basics and use for evaluating electronic devices and materials. Berlin, Springer. https://doi.org/10.1007/978-3-642-02417-7
4. Da Silva WF, Melo RAC, Grosso M, et al. (2020) Active thermography data-processing algorithm for nondestructive testing of materials. IEEE Access 8: 175054–175062. https://doi.org/10.1109/ACCESS.2020.3025329
5. Rösch R, Tanenbaum DM, Jørgensen M, et al. (2012) Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—The ISOS-3 inter-laboratory collaboration. Energy Environ Sci 5: 6521–6540. https://doi.org/10.1039/c2ee03508a