DESIGN OF IMPROVED CONTROL ALGORITHMS FOR LADLE FURNACES WITH ANALYSIS OF ELECTRIC ARC CURRENT HARMONIC COMPOSITION-Reference-Cited by-同舟云学术

DESIGN OF IMPROVED CONTROL ALGORITHMS FOR LADLE FURNACES WITH ANALYSIS OF ELECTRIC ARC CURRENT HARMONIC COMPOSITION

Published:2022 Issue:3 Volume:22 Page:62-75
ISSN:1990-8512
Container-title:Bulletin of the South Ural State University series "Power Engineering"
language:
Short-container-title:PE

Author:

Nikolaev A.A.^ORCID, ,Ivekeev V.S.^ORCID,Tulupov P.G.^ORCID,Ryzhevol S.S.^ORCID

Abstract

The aim of this research is the design of improved control algorithms for ladle furnaces, considering arc length adaptation to different argon blow conditions and slag layer depth. The paper considers the issues of optimizing asymmetric arc burn-ing regimes, which ensure the maximum reduction in radiation and an increase in thermal efficiency in phases located near the liquid metal mirror during bottom blowing and emergency lance operation. The experimental results of liquid bath sur-face behavior in dependence from blowing intensity and slag layer depth are presented. On the basis of experimental re-sults, new algorithms of electric modes control in ladle furnaces are proposed. These algorithms allow dynamic adaptation of electric arc lengths to different argon blowing modes and slag layer depth to be provided. Applying of this algorithm al-lows the requisite conditions for improving of different quality indicators in ladle furnace to be ensured, since the correct adaptation of electric mode to varying conditions of melting has a direct con-nection with thermal efficiency of electric arcs and efficiency of equipment in general.

Publisher

FSAEIHE South Ural State University (National Research University)

Subject

General Medicine

Reference15 articles.

1. 1. Mironov Yu.M. Features of arc steel-making furnaces as receivers of electric power. Electrometallurgy. 2020;(9):2-8. (In Russ.) DOI: 10.31044/1684-5781-2020-0-9-2-8

2. 2. Glukhov I.V., Mekhriakov D.V., Voronov G.V., Vdovin K.M., Rybak A.A., Taranov V.V. Power mana¬ging in the modern EAF DSP-120. Steel in Translation. 2020;(5):21-23.

3. 3. Kornilov G.P., Nikolaev A.A., Khramshin T.R. et al. Improving the efficiency of a heavy-duty arc steel-smelting furnace. Izvestiya vysshikh uchebnykh zavedenii. Elektromekhanika = Russian electromechanics. 2009;(1):55-59. (In Russ.)

4. 4. Kornilov G.P., Nikolaev A.A., Yakimov I.A. Prospects and means of increasing the efficiency of arc steel-smelting furnaces at the expense of power electrical equipment. Bulletin of the South Ural State University. Ser. Power Engineering. 2009;15(148):32-38. (In Russ.)

5. 5. Mees H., Hohl J., Krüger K. Dynamic Condition-Based Scrap Melt Control: Results of the Application at Thyssenkrupp Nirosta in Bochum. In: 10th European Electric Steelmaking Conference; 2012.