Author:
Glazunov G.P.,Konotopskiy O.L.,Garkusha I.E.,Elisieiev D.V.
Abstract
The work presents some experimental results obtained in the new module construction of an electrolyzer with tube electrodes: mass spectra of the mixtures of gases, generated during electrolysis, volt-ampere characteristics, etc. It has been shown that at electrolytes (H2O + 1 wt.% NaHCO3, H2O + 1 wt.% Na2CO3) temperature of ~ 50 °C and a pressure in the electrolyzer chamber of ~ 2 atm, the generated gas is 92 vol.% consists of hydrogen. Estimations show from two to four times (in dependence on electrolyte composition) higher effectiveness of converting electri-cal energy into the amount of electrolysis gas for new electrolysis setup construction compared to the previous ver-sion.
Publisher
Problems of Atomic Science and Technology
Reference6 articles.
1. V. Schroder, B. Emonts, Holger Janban, H.-P. Schulze. Explosion limits of hydrogen/oxygen mixtures at initial pressure up to 200 bar//Chemical Engineering and Technology. 2004, v. 27(80), p. 847-851; DOI 10.1002/ceat.200403174
2. Gennadiy Glazunov, Aleksey Konotopskiy, Dmitriy Elisieiev, Igor Garkusha, Sergey Maznichenko. Hydrogen generation under electrolysis process using Ni diffusion catalytic membranes as electrodes//International Journal on Applied Physics and Engineering. 2023, v. 2, p. 194-198; DOI: 10.37394/232030.2023.2.17
3. G.P. Glazunov, A.S. Bodnar, A.L. Konotopskiy, D.M. Vinogradov, S.M. Maznichenko, and I.E. Gar-kusha. Erosion behavior of nickel diffusion membranes in conditions of water electrolysis // Problems of Atomic Science and Technology. Series “Plasma Physics” (28). 2022, N 6(142), p. 111-113
4. G.P. Glazunov, D.I. Baron, V.E. Moiseenko, M.N. Bondarenko, A.L. Konotopskiy, A.V. Lozin, A.I. Lyssoivan, T. Wauters, and I.E. Garkusha. Characterization of wall conditions in Uragan-2M stellarator using stainless steel thermal desorption probe // Fusion Engineering and Design. 2018, v. 137, p. 196-201.
5. G.P. Glazunov, A.A. Andreev, D.I. Baron, V.M. Shulaev, V.A. Stolbovoy, V.Ya. Chernyshenko. The influence of the method of applying vacuum-arc TiN coatings on their outgassing in a vacuum at high temperatures //Physical engineering of the surface. 2009, v. 7, N 4, p. 341-346.