Features of the iron determination in dust emissions of gas purification of electrometallurgical production

Abstract

Features of the iron determination in dust emissions of gas purification at electrometallurgical facilities are considered. The elemental and phase compositions of dust emissions were determined using energy dispersive x-ray fluorescence analysis (EDXRF) and inductively coupled plasma atomic emission spectrometry (ICP-AES). Sample preparation conditions were optimized with allowance for the analytical methods used. The phase composition of dust emissions represented mainly by zincite, zinc ferrite, halite and sylvite was preliminary determined by X-ray phase analysis. Model mixtures were prepared and used to construct calibration dependences taking into account the results of diffractometric studies. A technique for rapid x-ray fluorescence determination of iron in dust emissions of gas purification has been developed. The methods for iron determination tested on real samples of dust emissions of electrometallurgical production demonstrated a satisfactory convergence of the results obtained by EDXRF (Sr = 1.3%) and ICP-AES (Sr = 2.6%).