SURFACE Nb-ALLOYING ON 0.4C–13Cr STAINLESS STEEL: MICROSTRUCTURE AND TRIBOLOGICAL BEHAVIOR-Reference-Cited by-同舟云学术

SURFACE Nb-ALLOYING ON 0.4C–13Cr STAINLESS STEEL: MICROSTRUCTURE AND TRIBOLOGICAL BEHAVIOR

Published:2016-06-15 Issue:04 Volume:23 Page:1650017
ISSN:0218-625X
Container-title:Surface Review and Letters
language:en
Short-container-title:Surf. Rev. Lett.

Author:

YU SHENGWANG¹,YOU KAI¹,LIU XIAOZHEN¹,ZHANG YIHUI¹,WANG ZHENXIA¹,LIU XIAOPING¹

Affiliation:

1. Research Institute of Surface Engineering, Taiyuan University of Technology, No.79 Yingze Street, Taiyuan 030024, Shanxi, P. R. China

Abstract

0.4C–13Cr stainless steel was alloyed with niobium using double glow plasma surface alloying and tribological properties of Nb-alloyed steel such as hardness, friction and wear were measured. Effects of the alloying temperature on microstructure and the tribological behavior of the alloyed steel were investigated compared with untreated steel. Formation mechanisms of Nb-alloyed layers and increased wear resistance were also studied. The result shows that after surface Nb-alloying treatment, the 0.4C–13Cr steel exhibits a diffusion adhesion at the alloyed layer/substrate interface and improved tribological property. The friction coefficient of Nb-alloyed steel is decreased by about 0.3–0.45 and the wear rate after Nb-alloying is only 2–5% of untreated steel.

Publisher

World Scientific Pub Co Pte Lt

Subject

Materials Chemistry,Surfaces, Coatings and Films,Surfaces and Interfaces,Condensed Matter Physics

Link

https://www.worldscientific.com/doi/pdf/10.1142/S0218625X16500177

Reference18 articles.

1. AISI 420 martensitic stainless steel low-temperature plasma assisted carburizing kinetics

2. Characteristics of martensitic stainless steel nitrided in a low-pressure RF plasma

3. Friction and rolling–sliding wear of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel

4. Low temperature plasma carburizing of martensitic stainless steel

5. Laser surface hardening of AISI 420 stainless steel treated by pulsed Nd:YAG laser

Cited by 4 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Surface modification of biomedical metals by double glow plasma surface alloying technology: A review of recent advances;Journal of Materials Research and Technology;2023-05

2. A modern-day alchemy: Double glow plasma surface metallurgy technology;AIP Advances;2022-03-01

3. Growth of nanocrystalline β-Nb2N coating on 430 ferritic stainless steel bipolar plates of PEMFCs by disproportionation reaction of Nb(IV) ions in molten salt;Corrosion Science;2020-09

4. Preparation and characterization of nanocrystalline β-Nb2N coating on 430 ferritic stainless steel by disproportionation of Nb(IV) ions in molten salt;Ceramics International;2020-05