Behavior of Reinforced Ultra-High Performance Concrete Slabs Under Impact Loading After Exposure to Elevated Temperatures

Abstract

Steel fiber-reinforced ultra-high performance concrete (UHPC) material is prone to explosive spalling under elevated temperatures. With the addition of polypropylene (PP) fiber, thermal spalling of UHPC can be mitigated and its fire resistance can be improved. This research investigates the impact resistance of steel and PP fiber-reinforced UHPC slabs after exposure to elevated temperatures, and the structural behavior and damage were compared against normal strength concrete (NSC) slabs. Karagozian & Case concrete (KCC) model was adopted to simulate both NSC and UHPC materials. With consideration of thermal hazards, the material damage, equation of state and strain rate sensitivity were adapted. The validity of this numerical model was evaluated against available experimental results. The numerical model was used to investigate the impact resistance of the reinforced UHPC slabs after exposure to fire hazards. The effect of fire exposure time, impact velocity and impact mass on the resistance of the reinforced NSC and UHPC slabs were analyzed. The simulation results revealed that punching shear failure areas in the NSC slabs were 2.5 times, 3.4 times, 3.0 times and 1.2 times larger than the UHPC slabs after exposure to international standardization ISO-834 standard fire for 1[Formula: see text]h, 2[Formula: see text]h, 3[Formula: see text]h and 4[Formula: see text]h, respectively. After exposure to the standard fire ISO-834 for 2 h, the punching shear failure on the bottom side of NSC increased 90.9% with the increase in falling height from 1[Formula: see text]m to 7[Formula: see text]m, while for the UHPC slabs, the increment was around 67.9%. After exposure to the standard fire ISO-834 for 2[Formula: see text]h, the punching shear damage of the NSC slabs increased by 72.9% with the punch weight increased from 100[Formula: see text]kg to 700[Formula: see text]kg, whereas the damage in the UHPC slabs increased by 53.8%.