ADSORPTION CHARACTERISTICS AND HEAT OF ADSORPTION MEASUREMENTS OF R-134a ON GRANULAR ACTIVATED CARBON-Reference-Cited by-同舟云学术

ADSORPTION CHARACTERISTICS AND HEAT OF ADSORPTION MEASUREMENTS OF R-134a ON GRANULAR ACTIVATED CARBON

Published:2014-09 Issue:03 Volume:22 Page:1450014
ISSN:2010-1325
Container-title:International Journal of Air-Conditioning and Refrigeration
language:en
Short-container-title:Int. J. Air-Cond. Ref.

Author:

ATTALLA M.¹,SADEK S.¹,ABD EL-FADEEL W.²

Affiliation:

1. Mechanical Power Department, Faculty of Engineering, South Valley University, Qena 83251, Egypt

2. Mechanical Power Station Department, Faculty of Energy Engineering, Aswan University, Aswan, Egypt

Abstract

The objective of this study is to investigate the adsorption characteristics of granular activated carbon GAC/R-134a pair in the temperature range of 20–60°C and pressure up to 10 bars. The Dubinin–Astakhov adsorption equilibrium model is fit to experimental data with acceptable error limit. The pressure–temperature–concentration (P–T–X) diagram of the pair is also presented. The isosteric heat of adsorption of R-134a on AC has been calculated using the Clausius–Clapeyron equation as a function of adsorption capacity. The maximum adsorption capacity was found to be 1.92 kgR134a/kgcarbon at 20°C after 1200 s. The experimental results also shows that the increase of heat transfer area improves the adsorption capacity per kg of adsorber, which lead to the design of a finned tubes heat exchanger adsorption unit.

Publisher

Springer Science and Business Media LLC

Subject

Fluid Flow and Transfer Processes,Renewable Energy, Sustainability and the Environment,Control and Systems Engineering

Link

https://www.worldscientific.com/doi/pdf/10.1142/S201013251450014X

Reference32 articles.

1. Theoretical performances of solid adsorbent cascading cycles using the zeolite-water and active carbon-methanol pairs: four case studies

2. Solid sorption heat powered cycles for cooling and heat pumping applications

3. Experimental investigation of activated carbon fibers/ethanol pairs for adsorption cooling system application

4. A review on adsorption working pairs for refrigeration

5. Adsorption characteristics and heat of adsorption measurements of R-134a on activated carbon

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Experimental Investigation of Optimum Source Temperature for the Adsorption Thermal Compressor Using Activated Carbon and R134a;Arabian Journal for Science and Engineering;2024-03-06

2. Solar-powered adsorption-based atmospheric water harvesting systems: Principles, materials, performance analysis, and configurations;Sustainable Energy Technologies and Assessments;2022-12

3. Characteristics of FAM-Z01 compared to silica gels in the performance of an adsorption bed;Applied Thermal Engineering;2016-07

4. Application of an embossed plate heat exchanger to adsorption chiller;International Journal of Refrigeration;2016-05

5. Evaluation method of iodine re-evolution from an in-containment water pool after a loss of coolant accident, Part I: pH estimation of a solution with various chemicals;Annals of Nuclear Energy;2016-01