Numerical Analysis on Usability of SHPB to Characterize Dynamic Stress–Strain Relation of Metal Foam

Abstract

Split Hopkinson pressure bar (SHPB) technique is the most important test method to characterize dynamic stress–strain relations of various materials at different strain rates, and this technique requires uniform deformation of specimen during the experiment. However, some studies in recent years have found obvious deformation localization within metal foam specimens in SHPB tests, which may significantly affect the reliability of the results. Usability of SHPB to characterize dynamic stress–strain relation of metal foam becomes doubtful. In this paper, based on experimental verification, we carried out numerical simulative SHPB tests to study the problem, in which the metal foam specimens were modeled to have 3D meso structures with properties of their matrix material. Numerical simulative SHPB tests of aluminum foam specimens with varying thickness at different strain rates were performed. Deformation distribution in each local region of the specimen was examined and a concept of “effective specimen” was presented. Appropriate specimen thickness and range of testing strain rate were suggested based on quantitative analysis. Finally, we recommended a method how to revise the nominal strain and strain rate measured by traditional SHPB method to acquire the reliable dynamic stress–strain relation.