Affiliation:
1. Department of Mechanical Engineering, Faculty of Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran
Abstract
This study numerically investigated the behavior of a Newtonian droplet impacting a heated porous surface. In this regard, a two-phase finite volume code was used for laminar flow. The time adaptive method was applied to enhance the accuracy of results and better convergence of the solving process. Also, the dynamic grid adaptation technique was adopted to predict the liquid-air interface precisely. The results were first validated against experimental data at different Weber numbers. Then the effect of variations in the droplet temperature was investigated on the spreading factor. The obtained results revealed that the rise in droplet temperature led to an increase in the maximum spreading diameter due to the reduction in the effects of viscosity, density, and surface tension. In the next step, the effects of droplet impact on the hydrophilic and superhydrophobic surfaces with the porosities of 20–80% were evaluated. The obtained results revealed that the increase in the surface porosity caused a decrease in the droplet diameter during the impact time. Also, at high surface porosity values, the decline in the contact angle influence on the droplet dynamic behavior was observed.
Publisher
World Scientific Pub Co Pte Lt
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献