TECHNOLOGIES FOR THE FABRICATION OF NANOSCALE SUPERCONDUCTING CIRCUITS

Abstract

Researches on the fabrication of ~ 0.1 × 0.1 μ m 2 superconductor–insulator–superconductor (SIS) Josephson junctions are reviewed. Today, a typical dimension is 1–10 μm for Josephson junctions in superconducting integrated circuits. These Josephson junctions are defined by well-established photolithographic technology with reactive ion etching (RIE), and for the superconductor, Nb is almost always used. The merits of Nb include the facts that the superconducting transition temperature Tc of Nb (9.2 K ) is higher than the boiling point of He (4.2 K ), and that Nb has excellent stability against thermal cycling between room temperature and liquid- He temperature. For the fabrication of ~ 0.1 × 0.1 μ m 2 junctions, on the other hand, there is a standard process with electron-beam lithography, shadow evaporation, and lift-off. This process works well for Al (Tc = 1.2 K ), however, it is not ideal for Nb . The scope of this brief review is the nanoscale junction with Nb electrodes. We will look at the efforts of optimizing the standard lift-off process for Nb , electron-beam-lithographic versions of the Nb Josephson-junction technology, focused-ion-beam (FIB) etching as a convenient alternative to electron-beam lithography and RIE, etc. In order to characterize nanoscale tunnel junctions, the single-charge transistor has been often fabricated. Therefore, a summary of its theoretical transport properties is also included.