Hybrid nanofluid flow and heat transfer in symmetric porous ducts with CuO nanoparticles and multi-walled carbon nanotubes under peristaltic motion

Abstract

This study focuses on the analysis of peristaltic transport of a hybrid nanofluid comprising deionized water as a base fluid and the multi-walled carbon nanotubes (MWCNTs) and copper oxide (CuO) as nanoparticles within a sinusoidal wavy porous duct, taking into consideration the influence of heat generation or absorption. The inaugural literature piece addresses the utilization of hybrid nanofluid in the context of peristaltic flow within ducts. To simplify the analysis, we have converted the non-dimensional equations into a two-dimensional (2D) coordinate system using the assumptions of a very long wavelength [Formula: see text] and low Reynolds number (Re). The non-dimensional equations governing the behavior of the hybrid nanofluid are then solved numerically using the finite volume method. Numerical solutions for temperature and the 2D peristaltic flow are obtained with the assistance of the Mathematics software MATLAB. These solutions are subsequently represented graphically using MATLAB software. The graphical results highlight several key findings for important parameters. First, it is observed that the pressure rise, temperature profile, and pressure gradient in the hybrid nanofluid (CuMWCNTs/H2O) flow increases as heat generation increases. Furthermore, an increase in the nanoparticle volume fraction of both nanoparticles leads to a decrease in the pressure rise and pressure gradient in the hybrid nanofluid flow. Additionally, the widening of the channel reduces the pressure gradient and pressure rise in the CuMWCNTs/H2O hybrid nanofluid. The analysis also includes the visualization of streamlines for peristaltic transport. These streamlines reveal that an increase in amplitude results in larger bolus sizes, while heightened heat generation has the opposite effect, decreasing bolus sizes. The results of this investigation can be found in various cooling devices as flows in the ducts are very frequently utilized for the cooling process of engines. A further topic is common in applications related to microfluidics, heat exchangers, and biomedical devices where peristaltic pumping is employed. Our results are in 100% agreement with the existing literature in special cases.