Dynamic Characteristics of M-Shape Metal Rubber-Coated Pipeline System: Numerical Modeling and Experimental Analysis

Abstract

As a high-temperature resistant damping material, reducing vibration by coating with M-shape metal rubber (MMR) in a pipeline system is a promising solution due to its energy dissipation induced by micro dry friction between metallic wires. The main challenge for dynamic calculation and performance evaluation of elastic-porous metal rubber (MR) is derived from the intricate spatial network structure. In this work, the dynamic properties including acceleration admittance and insertion loss of the MMR-coated pipeline system were conducted by numerical simulation and experimental analysis. The constitutive models used to characterize hysteresis phenomena, including Yeoh and Bergström–Boyce models, were identified with different density parameters and adopted for steady-state dynamic numerical analysis. The sine sweep frequency test was conducted to verify the accuracy of the developed numerical model. The results indicate that the maximum error of stress–strain curve between numerical prediction and experimental measurement is 10.7%. In the frequency range of 0–1 500[Formula: see text]Hz, the insertion loss of the MMR-coated pipeline system is positively correlated with the density of MMR, as opposed to the coating distance of pipeline clamps and the influence of excitation force is minimal. Furthermore, the error of dynamic response of the pipeline system in low frequency between the experiment and simulation is 4.7%, indicating that the accuracy of the hysteresis model in predicting the dynamic characteristic of MR materials is effective.