MULTI-OBJECTIVE OPTIMIZATION OF A GLASS FIBER CUTTING PROCESS BY APPLYING THE FUZZY-BASED TAGUCHI METHOD-Reference-Cited by-同舟云学术

MULTI-OBJECTIVE OPTIMIZATION OF A GLASS FIBER CUTTING PROCESS BY APPLYING THE FUZZY-BASED TAGUCHI METHOD

Published:2013-04 Issue:02 Volume:20 Page:1350008
ISSN:0218-5393
Container-title:International Journal of Reliability, Quality and Safety Engineering
language:en
Short-container-title:Int. J. Rel. Qual. Saf. Eng.

Author:

YANG CHAO-LIEH¹,YU KUN-TZU²

Affiliation:

1. Department of Industrial Engineering and Management Information, Huafan University, No. 1, Huafan Rd. Shihding Dist., New Taipei City 223, Taiwan, Republic of China

2. Department of Information Engineering and Informatics, Tzu Chi College of Technology, 880, Section 2, Chien-Kuo Road, Hualien 97005, Taiwan, Republic of China

Abstract

This paper presents a new approach to optimizing the cutting glass fiber with multiple performance characteristics, based on reliability analysis, Taguchi, and fuzzy logic. The speed, volume, and cutting load parameters were optimized during the cutting process with the application of the Weibull modulus to the blade wear. In this study, optimization with multiple performance characteristics was found to be the highest cutting speed and smallest cutting volume, and highest cutting load. An analysis of variance (ANOVA) of the multiple performance characteristic indicates that the cutting speed (37.22%), the cutting volume (26.74%), and the cutting load (20.50%) are the crucial parameters in the cutting process of glass fibers. In summary, the optimal cutting parameter should be A3B1C2. The experimental results are presented to demonstrate the effectiveness of this approach.

Publisher

World Scientific Pub Co Pte Lt

Subject

Electrical and Electronic Engineering,Industrial and Manufacturing Engineering,Energy Engineering and Power Technology,Aerospace Engineering,Safety, Risk, Reliability and Quality,Nuclear Energy and Engineering,General Computer Science

Link

https://www.worldscientific.com/doi/pdf/10.1142/S0218539313500083

Reference19 articles.

1. A study on the cutting characteristics of glass fiber reinforced plastics with respect to tool materials and geometries

2. Wear characteristics and mechanisms of a thin edge cutting blade

3. Wear rates and wear mechanisms of alumina-based tools cutting steel at a low cutting speed

4. Reliability and failure of face-milling tools when cutting stainless steel

5. Reliability Analysis of Cutting Tools

Cited by 2 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Application of the Taguchi method to improve a medical device cutting process;The International Journal of Advanced Manufacturing Technology;2016-04-16

2. Weibull and lognormal Taguchi analysis using multiple linear regression;Reliability Engineering & System Safety;2015-12