Joining of Carbon Fibre Reinforced SiC (Cf/SiC) to Ni-Based Superalloy with Multiple Interlayers-Reference-Cited by-同舟云学术

Joining of Carbon Fibre Reinforced SiC (Cf/SiC) to Ni-Based Superalloy with Multiple Interlayers

Published:2003-04-10 Issue:08n09 Volume:17 Page:1777-1781
ISSN:0217-9792
Container-title:International Journal of Modern Physics B
language:en
Short-container-title:Int. J. Mod. Phys. B

Author:

Li Shujie¹,Zhang Jianjun¹,Liang Xiaobo¹,Duan Huiping¹,Zhang Yan²

Affiliation:

1. Department of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing, 100083, People's Republic of China

2. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, People's Republic of China

Abstract

Welding of C f / SiC to Ni-based superalloy has been realized using Cu/W/Cu/W/Cu multiple interlayers. The bending strength of the joints has been improved by using the active metallic filler contacted with C f / SiC . The strength of the joints is remarkably affected by the welding temperature. The maximum value 102.1 MPa has been obtained at 970°C (dwell time: 10 min., welding pressure: 34.3 MPa). Microstructural studies were also conducted.

Publisher

World Scientific Pub Co Pte Lt

Subject

Condensed Matter Physics,Statistical and Nonlinear Physics

Link

https://www.worldscientific.com/doi/pdf/10.1142/S0217979203019654

Reference5 articles.

1. Oxidation protection for carbon fibre composites

2. W. D. Kingery, H. K. Bowen and D. R. Uhlmann, Introduction to Ceramics, 2nd edn. (John Wiley & Sons, New York, 1976) p. 595.

3. The improvement in oxidation resistance of CVD-SiC coated C/C composites by silicon infiltration pretreatment

4. Joining of SiC Ceramic to Ni-Based Superalloy with Cu Intermediate Layer

5. Shujie Li, Mass and Charge Transport in Inorganic Materials: Fundamentals to Devices, eds. P. Vincenzini and V. Buscaglia (Techno Srl, 2000) p. 1139.

Cited by 19 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Achieving balanced enhancement of mechanical performance and heat resistance in Cf/SiC-superalloy joints by regulating active element Ti in brazing filler;Materials Characterization;2023-11

2. Soldering Methods for Preparing Permanent Joints of Ceramic Composite Materials with Metals (Review Article);Refractories and Industrial Ceramics;2021-07

3. Reactive composite-diffusing brazing of Cf/SiC composite and stainless steel with (Cu–15Ti)+C filler material;Materials Science and Engineering: A;2020-06

4. Joining of Cf/SiC composite and stainless steel via Ag+Ti filler in-situ alloying;Journal of Materials Processing Technology;2019-12

5. Performance comparison of Al-Si-Ti and Co-Si-V-Ti braze alloys in the vacuum brazing of reaction-bonded silicon carbide;Welding in the World;2019-09-04