INFLUENCE OF ANNEALING ON RECOVERY STRESS OF COLD-WORKED Ni–Ti WIRE-Reference-Cited by-同舟云学术

INFLUENCE OF ANNEALING ON RECOVERY STRESS OF COLD-WORKED Ni–Ti WIRE

Published:2009-06 Issue:02 Volume:02 Page:55-60
ISSN:1793-6047
Container-title:Functional Materials Letters
language:en
Short-container-title:Funct. Mater. Lett.

Author:

YAN XIAO-JUN¹,VAN HUMBEECK JAN¹

Affiliation:

1. Department of Metallurgy and Materials Engineering (MTM), Katholieke Universiteit Leuven, Kasteelpark Arenberg 44 bus 2450, B-3001 Leuven, Belgium

Abstract

The effect of annealing on the recovery stress of Ni – Ti wire has been studied by using a dynamic mechanical analyzer (DMA), TAQ800. The results show that the recovery stresses decrease with increasing annealing temperature in the range of 350–600°C and increase with increasing annealing temperature in the range of 600–900°C. It was found that the recovery stress is proportional to the plateau stress at room temperature, the recoverable strain under zero load and relative temperature increase above As.

Publisher

World Scientific Pub Co Pte Lt

Subject

General Materials Science

Link

https://www.worldscientific.com/doi/pdf/10.1142/S1793604709000569

Reference11 articles.

1. Non-medical applications of shape memory alloys

2. Recovery stress generation in shape memory Ti50Ni45Cu5 thin wires

3. Recovery stresses generated by NiTi shape memory wires under different constraint conditions

4. Part I. Thermomechanical characteristics of shape memory alloys

5. Part II. Thermomechanical characteristics of shape memory alloy composites

Cited by 14 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Characterization of Martensitic Transformation, Microstructure and a Kinetic Study of Ti-based High Temperature Shape Memory Alloy;Süleyman Demirel Üniversitesi Fen Edebiyat Fakültesi Fen Dergisi;2022-11-25

2. Factors Determining the Maximum Recovery Stress of the Ni47Ti44Nb9 Alloy During Constrained Heating;Metallurgical and Materials Transactions A;2022-01-10

3. Transformational, microstructural and superelasticity characteristics of Ti–V–Al high temperature shape memory alloys with Zr addition;Physica Scripta;2021-05-18

4. Influence of Annealing Time and Thermo-Mechanical Cycling on Constrained Recovery Properties of a Cold-Worked NiTi Wire;Journal of Materials Engineering and Performance;2016-12-12

5. Martensitic transformation and shape memory behavior of Ti-V-Al-Fe lightweight shape memory alloys;Journal of Alloys and Compounds;2016-09