The OpenPicoAmp-100k : an open-source high performance amplifier for single channel recording in planar lipid bilayers

Abstract

AbstractWe propose an upgraded version of our previously designed open-source lipid bilayer amplifier. This improved amplifier is now suitable both for the use in introductory courses in biophysics and neurosciences at the undergraduate level and for scientific research. Similar to its predecessor, the OpenPicoAmp-100k is designed using the common lithographic printed circuit board fabrication process and off-the-shelf electronic components. It consists of the high-speed headstage, followed by voltage-gain amplifier with built-in 6-order Bessel filter. The amplifier has a bandwidth of 100 kHz in the presence of 100 pF input membrane capacitance and is capable of measuring ion channel current with amplitudes from sub-pA and up to ±4 nA. At the full bandwidth and with a 1 GΩ transimpedance gain, the amplifier shows 12 pArms noise with an open input and 112 pArms noise in the presence of 100 pF input capacitance, while at the 5 kHz bandwidth (typical in single-channel experiments) noise amounts to 0.45 pArms and 2.11 pArms, respectively. Using an optocoupler circuit producing TTL-controlled current impulses and using 50% threshold analysis we show that at full bandwidth the amplifier has deadtimes of 3.5 µs and 5 µs at signal-to-noise ratios(SNR) of 9 and 1.7, respectively. Near 100% of true current impulses longer than 5 µs and 6.6 µs are detected at these two respective SNRs, while false event detection rate remains acceptably low. The wide bandwidth of the amplifier was confirmed in bilayer experiments with alamethicin, for which open ion channel current events shorter that 10 µs could be resolved.