Abstract
ABSTRACTThere is an ever-increasing demand for reduction of unit operations and a growing interest in the physiology of yeasts used in beer fermentation. In this context, cell immobilization is an interesting alternative, since it reduces steps to separate biomass from fermented broth. Yet, physiological alterations in yeast metabolism caused by immobilization are still to be fully described. Thus, the main objective of this work was to evaluate the physiology of three brewer’sS. cerevisiaeyeast strains (SY025, SY067 and SY001) immobilized on a porous cellulose-based support. Batch fermentations in malt extract 12 °P were carried out for all strains both in free and immobilized forms in order to compare kinetic parameters obtained from distinct process conditions. Mathematical modeling was performed following two viewpoints: modeling of fermentation kinetics by parameter estimation from experimental data and application of a reaction-diffusion model for estimation of substrate concentration gradient inside the immobilization support. Moreover, fermentations with different initial substrate and biomass concentrations were carried out using strain SY025, aiming to evaluate their influence over flavor compounds, using statistical models. Compared to free cells, immobilized yeasts showed both higher glycerol yield (SY025, 40%; SY067, 53%; SY001, 19%) and biomass yield in the system (SY025, 67%; SY067, 78%; SY001, 56%). On the other hand, free cells presented higher ethanol yields when compared to immobilized ones (SY025, 9%; SY067, 9%; and SY001, 13%). According to the model developed, a substrate gradient inside the support was predicted, but with low mass transfer limitations.KEY POINTSYeast immobilization not always hinder biomass growth, here it was stimulated.A classic kinetic model describes accurately immobilized yeast fermentations.Physiology changes occur in immobilization even with low mass transfer limitations.
Publisher
Cold Spring Harbor Laboratory