EXPERIMENTAL STUDIES ON HIGH-TEMPERATURE CORROSION INTERACTION OF TIN-LITHIUM ALLOY WITH STAINLESS STEEL AND REFRACTORY METALS-Reference-Cited by-同舟云学术

EXPERIMENTAL STUDIES ON HIGH-TEMPERATURE CORROSION INTERACTION OF TIN-LITHIUM ALLOY WITH STAINLESS STEEL AND REFRACTORY METALS

Published:2022-12-31 Issue:4 Volume: Page:94-100
ISSN:1729-7885
Container-title:NNC RK Bulletin
language:
Short-container-title:jour

Author:

Bochkov V.¹^ORCID,Ponkratov Yu.¹^ORCID,Gordienko Yu.¹^ORCID,Samarkhanov K.²^ORCID,Tulubayev E.³^ORCID,Saparbek E.³,Orazgaliyev N.¹,Orazymbekov B.¹,Aryngazy E.¹

Affiliation:

1. Branch “Institute of Atomic Energy” RSE NNC RK

2. Branch “Institute of Atomic Energy” RSE NNC RK; Sarsen Amanzholov east Kazakhstan state university

3. Branch “Institute of Atomic Energy” RSE NNC RK; Tomsk Polytechnic University

Abstract

This article describes experimental investigations to determine the corrosion compatibility of candidate matrix materials of a capillary-porous structure (CPS) with a liquid tin-lithium alloy at high temperatures. The studies were conducted with the Sn75-Li25 alloy and samples of 12Ch18Ni10Ti grade austenite stainless steel, VEL-3 grade vanadium, and TT grade tantalum. Experiments on the interaction of a liquid tin-lithium alloy with candidate samples of the CPS matrix at high temperatures were carried out on an experimental TiGrA setup based on a TGA/DSC 3+ thermogravimetric analyzer. The paper provides a description of the methodology and conditions for conducting high-temperature corrosion tests. In the course of this work, experiments were carried out to study the compatibility of a tin-lithium alloy in the liquid phase with a stainless steel, vanadium and tantalum samples in the temperature range from 600 ℃ to 1000 ℃. Based on obtained results, the thermal effects of the processes occurring as a result of the interaction of the alloy with a candidate materials of the CPS matrix were determined. As a result of the analysis of the results obtained it has been revealed that at interaction of the studied materials with liquid tin-lithium alloy Sn75-Li25 at high temperatures complex physical and chemical processes take place, such as: selective dissolution of components by liquid alloy (solvent); penetration of component of liquid alloy (tin) into stainless steel depth; mass transfer of dissolved metals from solid metal into liquid.

Publisher

Republican State Enterprise "National Nuclear Center of the Republic of Kazakhstan"

Reference13 articles.

1. Krasin. V.P., Soyustova. S.I. Quantitative evaluation of thermodynamic parameters of Li-Sn alloys related to their use in fusion reactor // Journal of Nuclear Materials. – 2018. – Vol. 505. – P. 193–199. https://doi.org/10.1016/j.jnucmat.2018.04.008

2. Kvona. V., Oyarzabal. E., Zoethout. E., Martin-Rojo A.B., Morgan T.W., Tabarés F.L. Secondary electron emission of tin and tin-lithium under low energy helium plasma // Nuclear Materials and Energy. – 2017. – Vol. 13. – P. 21–27. https://doi.org/10.1016/j.nme.2017.09.005.

3. Loureiro, J.P.S., Fernandes. H., Tabarés. F.L., Mazzitelli. G., Silva. C., Gomes. R., Alves. E., Mateus.R., Pereira. T., Figueiredo. H., Alves. H., Deuterium retention in tin (Sn) and lithium–tin (Li–Sn) samples exposed to ISTTOK plasmas // Nuclear Materials and Energy. – 2017. – Vol. 12. – P. 709–713. https://doi.org/10.1016/j.nme.2016.12.026.

4. Loureiro, J.P.S, Tabarés F.L., Fernandes. H., Silva. C., Gomes. R., Alves. E., Mateus. R., Pereira. T., Alves. H., Figueiredo. H. Behavior of liquid Li-Sn alloy as plasma facing material on ISTTOK // Fusion Engineering and Design. – 2017. – Vol. 117. – P. 208–211. https://doi.org/10.1016/j.fusengdes.2016.12.031.

5. Tabarés, F.L., Oyarzabal E., Martin-Rojo A.B., Tafalla. D., A. de Castro., F.Medina., Ochando M.A., Zurro B., McCarthy K., the TJ-II Team. Experimental tests of LiSn alloys as potential liquid metal for the divertor target in a fusion reactor // Nuclear Materials and Energy. – 2017. – Vol. 12. – P. 1368–1373. https://doi.org/10.1016/j.nme.2016.11.026.