Affiliation:
1. Institute of Atomic Energy RSE NNC RK, Branch
Abstract
The paper presents the results of the development and manufacture, as well as assembly and installation of a test device for testing miniature samples by the SPT method. The results of mechanical tests by tensile and SPT methods of 35X steel material after heat treatment (quenching + tempering) at different tempering temperatures. The evaluation of changes in the strength characteristics of steel grade 35X, depending on the heat treatment mode. The correlation equations between the t/10 method and the yield strength of each 35X steel sample obtained during tensile tests were determined and obtained.
Publisher
Republican State Enterprise "National Nuclear Center of the Republic of Kazakhstan"
Reference19 articles.
1. M.P. Manahan, A.S. Argon, O.K. Harling, Mechanical behavior evaluation using the miniaturized disk bend test, Quaterly Progress Report on Damage Analysis and Fundamental Studies (1981) 82 – 103. DOE/ER-0046/8.
2. M.P. Manahan, A.S. Argon, O.K. Harling, The development of a miniaturized disk bend test for the determination of postirradiation mechanical properties, J. Nucl. Mater. (1981) 1545e1550, 103 & 104.
3. Y. Peng, L. Cai, H. Chen, C. Bao, A new method based on energy principle to predict uniaxial stress–strain relations of ductile materials by small punch testing. Int. J. Mech. Sci. 138–139, 244–249 (2018).
4. D. Andrés, T. García, S. Cicero, R. Lacalle, J.A. Álvarez, A. Martín-Meizoso, J. Aldazabal, A. Bannister, A. Klimpel, Characterization of heat affected zones produced by thermal cutting processes by means of Small Punch tests. Mater. Charact. 119, 55–64 (2016).
5. X. Yang, X. Wang, X. Ling, D. Wang, Enhanced mechanical behaviors of gradient nano-grained austenite stainless steel by means of ultrasonic impact treatment. Results Phys. 7, 1412– 1421 (2017).