Affiliation:
1. DİCLE ÜNİVERSİTESİ
2. DICLE UNIVERSITY, FACULTY OF ARCHITECTURE
Abstract
In this experimental study, nine different lightweight aggregate concrete (LWAC) specimens - in which natural lightweight scoria aggregate was used as coarse aggregate - were prepared for investigating the size of portlandite crystals in their interfacial transition zone (ITZ). Scanning Electron Microscope (SEM) was used to determine the size of portlandite crystals in ITZ of LWAC specimens. The size of portlandite crystals in ITZ of these LWAC specimens was determined quantitatively in order to identify its relation with ratios of ingredients and properties of LWAC that were investigated. It was determined that the size of portlandite crystals in ITZ of nine LWAC specimens is in the range of (0.91-2.047) µm. The size of portlandite crystals in ITZ is found to be increased when the water/cement (W/C) and coarse aggregate/total aggregate (Ac/A) ratios of LWAC get increased. On the other hand, the compressive strength and the oven-dry density of LWAC are found to be decreased when the size of portlandite crystals in ITZ gets increased. The best way to make portlandite beneficial from mechanical, physical and durability points of view is to transform it into so-called secondary hydration products by making it react with materials that have proper chemical properties for this transformation. In this case, the small portlandite crystals dissolve entirely, and the large portlandite crystals become smaller. Lightweight scoria aggregate used in this study is thought to have chemical properties to assist such a transformation in ITZ.
Publisher
Dicle Universitesi Muhendislik Fakultesi Muhendislik Dergisi
Reference35 articles.
1. J. J. Thomas and H. Jennings, “Materials of cement science primer: The science of concrete,” Northwestern University Infrastructure Technology Institute, USA, Rep. Project A474, 2009.
2. P. K. Mehta and P. J. M. Monteiro, Concrete - Microstructure, Properties, and Materials. Third ed., New York, NY, USA: McGraw-Hill, 2006.
3. K. M. Nemati, P. J. M. Monteiro, and K. L. Scrivener, “Analysis of compressive stress-induced cracks in concrete,” ACI Mater. J., vol. 95, no. 5, pp. 617-631, 1998.
4. L. Basheer, P. A. M. Basheer, and A. E. Long, “Influence of coarse aggregate on the permeation, durability and the microstructure characteristics of ordinary Portland cement concrete,” Constr. Build. Mater., vol. 19, pp. 682-690, 2005.
5. V. W. Y. Tam, X. F. Gao, and C. M. Tam, “Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach,” Cem. Concr. Res., vol. 35, pp. 1195-1203, 2005.