A physical modelling study of the reservoir scale effect on amplitude variation with incidence angle

Abstract

Abstract The 3D pre-stack seismic data from a physical modeling experiment were employed to investigate the effect of reservoir scales on AVO (amplitude variation with offset or incidence angle). Eight cuboid samples simulating cavernous reservoirs with different widths and the same thickness and elastic parameters were set within a 3D model. 3D seismic data acquisition and processing were conducted. To get the AVO responses of the samples with different widths, trough amplitudes corresponding to the sample tops at different incidence angles were extracted from the pre-stack angle gathers. Amplitude calibration for transducer radiation patterns was conducted on the extracted amplitudes at different angles. AVO analysis was conducted to quantitatively demonstrate the effect of sample scales on AVO characteristics. The effect of sample width was weak when the width was less than 60 m, which was 3/5 of the wavelength. When the width was larger than 60 m, both AVO intercept and gradient gradually increased with the sample width. The AVO gradient peaked at 150 m, which was 1.5 times the wavelength. Cross-plot analysis of AVO intercept and gradient showed the samples were aligned in a straight line when the sample width was less than twice the seismic wavelength. The result in this study partially verified the conclusions of reservoir scale effect on AVO responses drawn from previous numerical modelling studies. For a heterogeneous rectangular reservoir, the effect of reservoir scales on AVO responses could potentially be used to quantitatively estimate reservoir scale.