The strain characteristics of cracked anchored soft rock under short-term creep

Abstract

Abstract The short-term creep properties of cracked soft rock are the basis for analyzing and predicting the long-term deformation characteristics of engineering rock mass. Based on orthogonal test design and by means of physical testing and theoretical analysis, this paper systematically studies the short-term creep strain properties of soft rock mass with a vertical anchor form under different combinations of crack number, crack discontinuity degree and crack inclination. The results show the following: (i) as the stress increases, the growth rate of the instantaneous strain of the anchored soft rock slows down, the growth rate of the creep strain increases and the growth rate of the total strain decreases at first and before it then increases. Based on this, the idea is proposed that the stress corresponding to the turning stress of the total strain change rate, from small to large, is the turning stress of the strain rate. This stress value is approximately 50% of its uniaxial compressive strength (UCS). (ii) Statistical analysis shows that for the same cracked rock mass, the three characteristics of cracks have different effects on the instantaneous strain, creep strain and total strain of anchored soft rock, and a certain number of cracks under specific geometric conditions are beneficial to the long-term deformation control of anchored soft rock. (iii) A relative creep model based on mutation is proposed. Considering the effects of the test instrument, the model can be divided into the power function model, the logarithmic function model and the exponential function model, according to goodness of fit. All three models can describe the initial and stable creep stage of anchored soft rock with cracks.