Pore formation during dehydration of a polycrystalline gypsum sample observed and quantified in a time-series synchrotron X-ray micro-tomography experiment
-
Published:2012-03-08
Issue:1
Volume:3
Page:71-86
-
ISSN:1869-9529
-
Container-title:Solid Earth
-
language:en
-
Short-container-title:Solid Earth
Author:
Fusseis F.,Schrank C.,Liu J.,Karrech A.,Llana-Fúnez S.,Xiao X.,Regenauer-Lieb K.
Abstract
Abstract. We conducted an in-situ X-ray micro-computed tomography heating experiment at the Advanced Photon Source (USA) to dehydrate an unconfined 2.3 mm diameter cylinder of Volterra Gypsum. We used a purpose-built X-ray transparent furnace to heat the sample to 388 K for a total of 310 min to acquire a three-dimensional time-series tomography dataset comprising nine time steps. The voxel size of 2.2 μm3 proved sufficient to pinpoint reaction initiation and the organization of drainage architecture in space and time. We observed that dehydration commences across a narrow front, which propagates from the margins to the centre of the sample in more than four hours. The advance of this front can be fitted with a square-root function, implying that the initiation of the reaction in the sample can be described as a diffusion process. Novel parallelized computer codes allow quantifying the geometry of the porosity and the drainage architecture from the very large tomographic datasets (20483 voxels) in unprecedented detail. We determined position, volume, shape and orientation of each resolvable pore and tracked these properties over the duration of the experiment. We found that the pore-size distribution follows a power law. Pores tend to be anisotropic but rarely crack-shaped and have a preferred orientation, likely controlled by a pre-existing fabric in the sample. With on-going dehydration, pores coalesce into a single interconnected pore cluster that is connected to the surface of the sample cylinder and provides an effective drainage pathway. Our observations can be summarized in a model in which gypsum is stabilized by thermal expansion stresses and locally increased pore fluid pressures until the dehydration front approaches to within about 100 μm. Then, the internal stresses are released and dehydration happens efficiently, resulting in new pore space. Pressure release, the production of pores and the advance of the front are coupled in a feedback loop.
Publisher
Copernicus GmbH
Subject
Paleontology,Stratigraphy,Earth-Surface Processes,Geochemistry and Petrology,Geology,Geophysics,Soil Science
Reference37 articles.
1. Arns, C. H., Knackstedt, M. A., Val Pinczewski, W., and Garnoczi, E. J.: Computation of linear elastic properties from microtomographic images: Methodology and agreement between theory and experiment, Geophysics, 67/5, 1396–1405, 2002. 2. Ballirano, P. and Melis, E.: Thermal behaviour and kinetics of dehydration of gypsum in air from in situ real-time laboratory parallel-beam X-ray powder diffraction, Phys. Chem. Min., 36, 391–402, 2009. 3. Banhart, J.: Advanced Tomographic Methods in Materials Research and Engineering, Oxford University Press, USA, 2008. 4. Bezou, C., Nonat, A., Mutin, J.-C., Christensen, A. N., and Lehmann, M. S.: Investigation of the crystal structure of γ-CaSO4, CaSO4$\\cdot $0.5 H2O, and CaSO4$\\cdot $0.6 H2O by powder diffraction methods, J. Solid State Chem., 117, 165–176, 1995. 5. Brantut, N., Schubnel, A., David, E. C., Héripré, E., Gueguen, Y., and Dimanov, A.: Dehydration-induced damage and deformation in gypsum and implications for subduction zone processes, J. Geophys. Res., https://doi.org/10.1029/2011JB008730, in press., 2012.
Cited by
49 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|