Quantification of PM<sub>2.5</sub> organic carbon sampling artifacts in US networks
-
Published:2010-06-15
Issue:12
Volume:10
Page:5223-5239
-
ISSN:1680-7324
-
Container-title:Atmospheric Chemistry and Physics
-
language:en
-
Short-container-title:Atmos. Chem. Phys.
Author:
Chow J. C.,Watson J. G.,Chen L.-W. A.,Rice J.,Frank N. H.
Abstract
Abstract. Field blanks (bQF) and backup filters (quartz-fiber behind quartz-fiber filter; QBQ) have been adopted by US long-term air quality monitoring networks to estimate PM2.5 organic carbon (OC) sampling artifacts. This study documents bQF and QBQ carbon levels for the: 1) Interagency Monitoring of Protected Visual Environments (IMPROVE); 2) Speciation Trends Network (STN; part of the Chemical Speciation Network [CSN]); and 3) Southeastern Aerosol Research and Characterization (SEARCH) networks and examines the similarities/differences associated with network-specific sampling protocols. A higher IMPROVE sample volume and smaller filter deposit area results in PM2.5 areal density (μg/cm2 on filter) 3–11 times those of STN/CSN and SEARCH samples for the same ambient PM2.5 concentrations, thus reducing the relative contribution of sampling artifacts from passive OC adsorption. A relatively short (1–15 min) passive exposure period of STN/CSN and SEARCH bQF OC (0.8–1 μg/cm2) underestimates positive and negative OC artifacts resulting from passive adsorption or evaporation of semi-volatile organic compounds on quartz-fiber filters. This is supported by low STN/CSN and SEARCH bQF levels and lack of temporal or spatial variability among the sites within the networks. With a much longer period, ~7 days of ambient passive exposure, average IMPROVE bQF and QBQ OC are comparable (2.4±0.5 and 3.1±0.8 μg/cm2, respectively) and more than twice levels found in the STN/CSN and SEARCH networks. Sampling artifacts in STN/CSN were estimated from collocated IMPROVE samples based on linear regression. At six of the eight collocated sites in this study, STN/CSN bQFs underestimated OC artifacts by 11–34%. Using a preceding organic denuder in the SEARCH network minimized passive adsorption on QBQ, but OC on QBQ may not be attributed entirely to the negative sampling artifact (e.g., evaporated or volatilized OC from the front filter deposits after sample collection).
Publisher
Copernicus GmbH
Subject
Atmospheric Science
Reference72 articles.
1. Arhami, M., Kuhn, T., Fine, P. M., Delfino, R. J., and Sioutas, C.: Effects of sampling artifacts and operating parameters on the performance of a semicontinuous particulate elemental carbon/organic carbon monitor, Environ. Sci. Technol., 40(3), 945–954, 2006. 2. Arp, H. P. H., Schwarzenbach, R. P., and Goss, K. U.: Equilibrium sorption of gaseous organic chemicals to fiber filters used for aerosol studies, Atmos. Environ., 418241–8252, 2007. 3. Ashbaugh, L. L., McDade, C. E., White, W. H., Wakabayashi, P., Collett Jr., J. L., and Xiao-Ying, Y.: Efficiency of IMPROVE network denuders for removing nitric acid, in Proceedings, Regional and Global Perspectives on Haze: Causes, Consequences and Controversies, 32-1-32-8, 2004. 4. Cadle, S. H., Groblicki, P. J., and Mulawa, P. A.: Problems in the sampling and analysis of carbon particulate, Atmos. Environ., 17(3), 593–600, 1983. 5. Chen, L.-W. A., Chow, J. C., Watson, J. G., Moosmüller, H., and Arnott, W. P.: Modeling reflectance and transmittance of quartz-fiber filter samples containing elemental carbon particles: Implications for thermal/optical analysis, J. Aerosol Sci., 35(6), 765–780, 2004.
Cited by
138 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|