Characterization of the airborne aerosol inlet and transport system used during the A-LIFE aircraft field experiment

Abstract

Abstract. Atmospheric aerosol particles have a profound impact on Earth's climate by scattering and absorbing solar and terrestrial radiation and by impacting the properties of clouds. Research aircraft such as the Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR) Falcon are widely used to study aerosol particles in the troposphere and lower stratosphere. However, transporting a representative sample to the instrumentation inside the aircraft remains a challenge due to high airspeeds and changing ambient conditions. In particular, for high-quality coarse-mode aerosol measurements, knowledge about losses or enhancements in the aerosol sampling system is crucial. In this study, the sampling efficiency of the aerosol inlet aboard the Falcon research aircraft is characterized for the first time with state-of-the art in situ measurements including sizing instruments operated behind the Falcon aerosol inlet and mounted at the aircraft wing not affected by the aerosol inlet. Sampling efficiencies were derived for different true airspeed ranges by comparing the in-cabin and ”full”-size-range particle number size distributions during 174 flight sequences with a major contribution of mineral dust particles during the ”Absorbing aerosol layers in a changing climate: aging, lifetime and dynamics” project (A-LIFE). Additionally, experimentally derived Stokes numbers were used to calculate the cutoff diameter of the aerosol sampling system for different particle densities as a function of true airspeed. As expected, the results show that the velocity of the research aircraft has a major impact on the sampling of coarse-mode aerosol particles with in-cabin instruments. For true airspeeds up to about 190 m s−1, aerosol particles larger than about 1 µm are depleted in the sampling system of the Falcon during the A-LIFE project. In contrast, for true airspeeds higher than 190 m s−1, an enhancement of particles up to a diameter of 4 µm is observed. For even larger particles, the enhancement effect at the inlet is still present, but inertial and gravitational particle losses in the transport system get more and more pronounced, which leads to a decreasing overall sampling efficiency. In summary, aerosol particles are either depleted or enhanced in the Falcon aerosol inlet, whereas transport in sampling lines always leads to a loss of particles. Here, we have considered both effects and determined the cutoff diameter for the A-LIFE transport system (i.e., the sampling lines only), the cutoff diameter of the Falcon aerosol inlet (i.e., the effect of the inlet only), and the combined effect of the inlet and sampling lines.