Simulation and fabrication of carbon nanotube–nanoparticle interconnected structures
-
Published:2021-04-27
Issue:1
Volume:12
Page:451-459
-
ISSN:2191-916X
-
Container-title:Mechanical Sciences
-
language:en
-
Short-container-title:Mech. Sci.
Author:
Lu Xiwen,Liu Jinhang,Ding Ye,Yang Lijun,Yang Zhan,Wang Yang
Abstract
Abstract. With the rapid development of nanotechnology,
the size of a device reaches sub-nanometer scale. The larger resistivity of interconnect leads to serious overheating of integrated circuits. Silicon-based electronic devices have also reached the physical limits of their
development. The use of carbon nanotubes instead of traditional wires has
become a new solution for connecting nano-structures. Nanocluster particles
serving as brazing material play an important role in stabilizing the
connection of carbon nanotubes, which places higher demands for nanoscale
manipulation techniques. In this paper, the dynamic processes under
different operating scenarios were simulated and analyzed, including probe propulsion nanoparticle operation, probe pickup nanoparticle operation and probe pickup nanocluster particle operation. Then, the SEM (Scanning
Electron Microscope) was used for nanoparticle manipulation experiments. The
smallest unit of carbon nanotube wire was obtained by three-dimensional (3D)
construction of a carbon nanotube–silver nanocluster particle (CN-AgNP), which verified the feasibility of 3D manipulation of carbon nanotube wire construction. The experiments on the construction of carbon
nanotube–nanocluster particle structures in three-dimensional operation were completed, and the smallest unit of carbon nanotube wire was constructed.
This nano-fabrication technology will provide an efficient and mature
technical means in the field of nano-interconnection.
Publisher
Copernicus GmbH
Subject
Industrial and Manufacturing Engineering,Fluid Flow and Transfer Processes,Mechanical Engineering,Mechanics of Materials,Civil and Structural Engineering,Control and Systems Engineering
Reference22 articles.
1. Bartenwerfer, M. and Fatikow, S.: Nanorobot-based handling and transfer of
individual silicon nanowires, Int. J. Intell.
Mech. Robot., 2, 34–46,
https://doi.org/10.4018/ijimr.2012040103, 2012. 2. Bocko, J. and Lengvarský, P.: Buckling of single-walled carbon nanotubes
with and without defects, J. Mech. Sci. Technol., 31,
1825–1833, https://doi.org/10.1007/s12206-017-0330-y, 2017. 3. Bocko, J., Lengvarský, P., Huňady, R., and Šarloši, J.: The
computation of bending eigenfrequencies of single-walled carbon nanotubes
based on the nonlocal theory, Mech. Sci., 9, 349–358,
https://doi.org/10.5194/ms-9-349-2018, 2018. 4. Conradi, M., Kocijan, A., Kosec, T., and Podgornik, B.: Manipulation of TiO2
Nanoparticle/Polymer Coatings Wettability and Friction in Different
Environments, Materials, 13, 1702, https://doi.org/10.3390/ma13071702, 2020. 5. Fukuda, T., Arai, F., and Dong, L.: Assembly of nanodevices with carbon
nanotubes through nanorobotic manipulations, P. IEEE, 91,
1803–1818, https://doi.org/10.1109/JPROC.2003.818334, 2003.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|