Author:
Liu Weiwei,Guo Yuanyuan,Zhang Mai,Zhang Jian
Abstract
A Re-containing single-crystal superalloy was used to research the high temperature low stress creep behavior. Transmission electron microscope, scanning electron microscope and some other research methods are employed. The results and analysis are summarized below: Two mechanisms for the steady creep are found in this experiment. The volume fraction of pores after creep test at 1100°C increased more than 2 times compared with that before test, but the increasing at 1000°C is relatively small, which reveals that temperature has an great influence on the formation of pore during creep; There are two types of pores associated with fracture during the creep process. One is the casting shrinkage located between the interdentritic, which is formed in the solidification of the alloy. Another type of pore is nucleated and growing during the creep deformation.
Reference15 articles.
1. Reed R. C.. The superalloys: Fundamentals and applications. (Cambridge University Press, 2006)
2. Tang Y., Huang M., Xiong J., et al. Acta Materialia, 126 (2017)
3. Ma S., LV X., Zhang J., et al. Journal of Alloys and Compounds, 743 (2018).
4. Zhang S., Tian S. G., et al. Rare Matel Materials and Engineering, 39 (2010).
5. Wen Z. X., Zhang D., Li S., et al. Journal of Alloys and Compounds, 692 (2017).
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献