Experimental and calculated evaluation of carbon fiber reinforcing for increasing concrete columns carrying capacity

Abstract

The article presents the concrete columns tests results reinforced with canvases based on carbon fibers FibARM Tape 530/300 and FibARM Lamel 14/100 slats, the calculation of the use effectiveness for strengthening the compressed reinforced concrete elements. Three groups of columns were tested: unreinforced columns, columns reinforced with FibARM Tape 530/300 canvases in one layer, reinforced with FibARM Lamel 14/100 lamella (width is 100 mm), while one of the samples was reinforced with lamella only, and the other was reinforced both lamella and clamps. In addition, it was proposed calibration calculation of concrete columns reinforced with canvases based on carbon fibers FibARM Tape 530/300, the calculation purpose was to determine the bearing capacity for evaluating the suitability in the further structure operation after columns strengthening. According to the experiment results, data were obtained on the carrying capacity of centrally compressed concrete columns reinforced with carbon fiber both with a discrete arrangement of bands (strips) made of composite material along the height of the structures, as well as with their continuous wrapping (analogue of reinforced concrete holder). According to the experiment results, data were obtained on the carrying capacity of centrally compressed concrete columns reinforced with carbon fiber, both with a discrete arrangement of bands (strips) made of composite material along the height of structures, and with their continuous wrapping (analogue of reinforced concrete holder).