Abstract
This paper presents the results of an experimental study of the subcooled water flow boiling on the surface of a metal rod 12 mm in diameter. As a result of the rapid heat release that occurs when an electric current is pulsed through a metal heater, the latter reaches certain temperature levels above the saturation temperature of water at the corresponding pressure (p = 0.17 MPa). In a system formed by a cold liquid and a heated solid body, the process of intense heat exchange begins, the cooling rate of the metal in which reaches its maximum when the nucleate boiling is realized. Interest in such scenarios is remaining high and is caused by the need for quantitative prediction of the characteristics of nucleate boiling and the existence boundaries of this boiling mode. As well-known, nucleate boiling is limited from above by the onset of film boiling and from below by the required surface temperature for which a significant number of nucleation centers are activated. The pressure waves arising during film boiling have a significant amplitude, as a result of which special conditions of interphase interactions may occur. The results of the study showed that self-oscillating pressure pulsations may occur which is associated with the nucleate boiling in an annular channel.