Author:
Pachurin G.V.,Kuzmin N.A.,Mochalina M.V.,Fillipov A.A.,Smirnova Z.V.,Kutepova L.I.
Abstract
In all industry sectors and in the automotive industry, in particular, structural materials that undergo various treatment methods are widely used. Various types of plastic deformation are widely used in the manufacture of products and structural elements made of low-carbon sheet steels. The authors studied the effect of the degree of technological deformation on the fatigue process parameters of flat low-carbon steels. It has been established that the preliminary deformation within the uniform limits causes an increase in fatigue resistance. The kinetic diagrams of the fatigue failure are used to estimate the change in durability from the rate of accumulation of fatigue damage at the cyclic deformation stage until the moment of origination and propagation of the fatigue crack. The ratio of the duration of fatigue failure stages of some sheet automotive steels depending on the degree of preliminary strain by stretching at a given amplitude stress of the cycle is revealed.
Reference21 articles.
1. Terentyev V.F., Fatigue of high–strength metal materials (IMET RAS - CIAM, Moscow, 2013)
2. Terentyev V.F., Korablev S.A., Fatigue of metals (Nauka, M., 2015)
3. Low-Cost Treatment of Rolled Products Used to Make Long High-Strength Bolts
4. The Effect of Modified-ausforming on Giga-cycle Fatigue Properties in Si-Mn Steels