Optimization of physical and mechanical properties of non-autoclaved aerated concrete based on industrial waste-Reference-Cited by-同舟云学术

Optimization of physical and mechanical properties of non-autoclaved aerated concrete based on industrial waste

Published:2023 Issue: Volume:401 Page:03010
ISSN:2267-1242
Container-title:E3S Web of Conferences
language:
Short-container-title:E3S Web of Conf.

Author:

Shaumarov Said,Gulamov Abdulaziz,Kandakhorov Sanjar,Abdunazarov Jamshid

Abstract

This article presents the results of experimental research on the parameters of aerated concrete porosity strength properties and properties based on industrial waste. The structurally optimal amount of water was determined, reflecting the physical-mechanical, thermal-technical properties of the outer wall structures based on aerated concrete. The test results were carried out in research laboratories using aerated block constructions with high porosity and optimal composition, and improved technological solutions for autoclaved aerated concrete were developed. Study of changes in the properties of aerated concrete with the addition of waste quartz sand and steel smelting slag; optimization of aerated concrete composition by mathematical regression method and determination of physical and mechanical properties; the results of the research on automating the calculation of the proposed composition of aerated concrete and the amount of industrial waste according to its brand are given.

Publisher

EDP Sciences

Subject

General Medicine

Link

https://www.e3s-conferences.org/10.1051/e3sconf/202340103010/pdf

Reference18 articles.

1. Ukhova T. A. Prospects for the development of production and use of cellular concrete T.A. Ukhova Cellular concrete in modern construction: Sat. scientific-practical. conf. - St. Petersburg, pp. 29-33. (2014).

2. Kazakov Yu. N. Low-rise town-planning complexes with energy-saving building systems and cellular concrete Cellular concrete in modern construction: Sat. reports, international scientific-practical. conf. - St. Petersburg, pp. 54-61. (2014).

3. Vylezhagin V.P. The walls of the building in a fixed formwork made of heat-insulating foam concrete. Cellular concrete in modern construction: Sat. reports, international scientific-practical. conf. -St. Petersburg, pp. 6-9. (2014).

4. Pinsker V.A. State and problems of production and application of cellular concrete. Cellular concrete in modern construction: Sat. scientific-practical. conf. -St. Petersburg, pp. 1-5. (2014).

5. Kondratev V.V. Structural and technological bases for obtaining “ultralight” foam concrete. Kazan, (2013).